Liquid–liquid equilibria for the ternary system water+n-dodecane+2-(2-n-hexyloxyethoxy)ethanol

Liquid–liquid equilibria for the ternary system water + tetradecane + 2-butyloxyethanol

“…Sassen et al [22] pointed out that it is not clear whether the UNIQUAC model is able to predict a three-liquid-phase-coexisting region of the ternary system water + dodecane + C 7 E 5 . In our previous study [14,15], we also had the same problem of correlating the experimental data of the three-liquid-phase-coexisting tie triangle to the UNIQUAC model. However, Negahban et al [23] and Brandani et al [24] were able to use the UNIQUAC model to describe the ternary system water + decane + C 4 E 1 successfully.…”

“…In addition, the phase behavior of mixtures of the type water + oil + C i E j also plays an important role in the fundamental work of critical phenomena, phase conductivity, and wetting transitions [3][4][5][6][7][8][9]. In our laboratory, recently, we have performed liquid-liquid equilibrium measurements on water + C i E j binary systems [10] and five ternary systems: water + dodecane + C 4 E 1 [11]; water + octane + C 4 E 2 [12]; water + decane + C 4 E 2 [13]; water + dodecane + C 6 E 2 [14]; and water + tetradecane + C 6 E 2 [15].…”

Liquid–liquid equilibria for the ternary system (water+hexadecane+dipropylene glycol n-propyl ether)

“…The highest and the lowest temperatures of the three-liquid-phase-coexisting body correspond to the, respectively, upper (UCST) and lower (LCST) critical solution temperatures. The phase behavior of the ternary (water + alkane + C i E j ) systems has been well examined [6][7][8][9][10][11][12][13].…”

Density, Viscosity, and Refractive Index for Water + 2-Butoxyethanol and + 2-(2-Butoxyethoxy)ethanol at Various Temperatures

“…In our laboratory, we have been extensively working on the phase behavior and the wetting behavior for systems of the types water + C i E j and water + C i E j + oil. [1][2][3][4][5][6][7][8][9][10][11][12][13][14][15][16][17][18] In this study, density, viscosity, and refractive index measurements were performed on two binary systems: water + 2-butoxyethanol (C 4 E 1 ) and water + 2-(2-butoxyethoxy)ethanol (C 4 E 2 ). To the best of our knowledge, there are neither viscosity nor refractive index measurements for the systems water + C 4 E 1 and water + C 4 E 2 available in the literature.…”