Logistic Model of Phase Transformation of Hardening Concrete

Abstract

The objective of this study was to analyze the effects of the modification of cementitious materials with the admixture of a superplasticizer and mineral additive in the form of microsilica. We analyzed the hardening process of cementitious materials as an autocatalytic transformation from a viscous liquid to a pseudo-solid body. The main achievement of the research involved the identification of changes in the content of the solid phase during the hardening of concrete mix as a model of the logistic curve. The phase transformation process begins with a viscous liquid which consists of water, cement, microsilica, superplasticizer and sand. The laboratory tests comprised research on the development of the kinetics of hardening heat of binder cement pastes and the development of mechanical properties of concrete in the hardening process. Three groups of mixtures with different concentrations of binders, determined by different water–binder indexes, were used. The first group was made up by cement paste consisting of cement and water. The second group contained cement paste from the first group supplemented with a superplasticizer, and the third group comprised the cement paste as in the second group, but additionally modified with microsilica. Using appropriate analyses, we defined a mathematical model of the phase transformation process. The model was then used for computer-aided numerical analyses. This made it possible to compare the relevant parameters of the logistic curve obtained for the seven different concrete mixes analyzed. Active impact of the applied mineral additive (microsilica) and that of chemical admixture in the form of a superplasticizer was demonstrated. All approximations of the measurement results with the use of a logistic curve had a determination level of over 0.98, indicating high agreement.

Effect of Thermal Cycles and Curing Age on Bonding Strength of Cement Mortar Using Manufactured Sand

“…Aiming to analyze the influence of thermal cycling on the pull-off strength more accurately, the development of MSM and RSM bonding strength was further analyzed using a straight line fitting equation (y = a + bx). Referring to the calculation methods published in existing research [41], the test probabilities for each estimated parameter were <<0.05, indicating the statistical significance of the results. The fitting results are shown in Figure 6, and Table 3 presents the coefficients from the fitting equation in Figure 6.…”

Evaluation of STEM students' spatial abilities based on a novel net cube imagination test

“…Analyzes were performed using TIBCO Statistica 13.3 software (TIBCO software Statistica 13.3). In statistical tests, measurements were made using the Shapiro-Wilk test (SW) to determine for the variables the normality of the distribution 58 . Statistical significance was determined using the Mann-Whitney U-test (MWU), which is a non-parametric test.…”

Effect of Wet Grinding Concrete Slurry Waste on Hydration and Hardening Properties of Cement: Micro-Nano-Scale Modification

“…Micro-nanoparticles can be obtained by wet grinding CSW, and these fine wet grinding concrete slurry waste (WCSW) particles can be used as excellent auxiliary cementitious materials [ 18 , 19 ]. In the complex hydration and hardening process of cement-based materials, the addition of auxiliary cementitious materials can usually play a modifying role; in particular, the addition of fine auxiliary cementitious materials is more beneficial for optimizing the properties of cement-based materials [ 20 , 21 , 22 ].…”