Low-Cost PVD Shadow Masks with Submillimeter Resolution from Laser-Cut Paper

Abstract

We characterize an affordable method of producing stencils for submillimeter physical vapor deposition (PVD) by using paper and a benchtop laser cutter. Patterning electrodes or similar features on top of organic or biological substrates is generally not possible using standard photolithography. Shadow masks, traditionally made of silicon-based membranes, circumvent the need for aggressive solvents but suffer from high costs. Here, we evaluate shadow masks fabricated by CO2 laser processing from quantitative filter papers. Such papers are stiff and dimensionally stable, resilient in handling, and cut without melting or redeposition. Using two exemplary interdigitated electrode designs, we quantify the line resolution achievable with both high-quality and standard lenses, as well as the positional accuracy across multiple length scales. Additionally, we assess the gap between such laser-cut paper masks and a substrate, and quantify feature reproduction onto polycarbonate membranes. We find that ~100 µm line widths are achievable independent of lens type and that average positional accuracy is better than ±100 µm at 4”-wafer scale. Although this falls well short of the micron-size features achievable with typical shadow masks, resolution in the tenths to tens of millimeters is entirely sufficient for applications from contact pads to electrochemical cells, allowing new functionalities on fragile materials.

Porous Membrane Electrical Cell–Substrate Impedance Spectroscopy for Versatile Assessment of Biological Barriers In Vitro

“…Notably, the variances for sputtered vs gold leaf electrode resistivity are comparable, indicating that the lab-based gold leaf fabrication is as reproducible as commercial-grade sputtering. Given the context of PM-ECIS as a platform for measuring biological barriers, this statistical analysis of our microfabrication process provides relevant insight into the interpretation of data obtained from our biological experiments and is also aligned with similar empirical approaches in other publications. − …”

Micromask Lithography for Cheap and Fast 2D Materials Microstructures Fabrication

“…The typical cost of the mask fabrication is rather affordable, depending on the resolution and can vary between USD 100 and USD 1000. The mask could be produced much more cheaply [ 42 , 43 ] if a m resolution is not crucial.…”

2D MXene electrochemical transistors

“…For electrode fabrication, a glass wafer was cleaned via subsequent ultrasonication in soapy water for 15 minutes, basic piranha cleaning in a solution of H 2 O : H 2 O 2 : NH 3 at around 70 °C for 5–10 minutes, and O 2 plasma for 15 min. Gold contacts were prepared by evaporation using a custom-made paper mask 50 to form a 10 nm-thick chromium layer as an adhesion layer and a 50 nm-thick gold layer.…”