Lugeon Tests at Partial Saturation: Experimental and Empirical Contributions

Abstract

Implications of improved understanding of variably saturated flow are numerous, especially given the complexity, heterogeneity and anisotropy of the intermediate fractured vadose zone. One such an implication is the quantification of water movement for engineering purposes, as flow through unsaturated discontinuities cannot be quantified through commonly applied saturated approaches. This paper presents an experimental study using geotechnical centrifuge modelling to investigate flow behaviour during Lugeon tests, through the fundamental concept of a smooth, clean, open fracture, at partial saturation. The study comprised flow visualisation experiments conducted on transparent replicas of horizontal and inclined fractures, with water injected under a consecutive series of ascending and descending pressures. Findings from the research proved that preferential flow occupied the minority of cross-sectional area despite the hydraulic pressure. Furthermore, the observed behaviour of these preferential pathways indicated non-linear flow. Deviation from linearity occurred at small fluxes and is likely as a result of inertial effects due to fluid bending at the inlet source into the fracture. In order to assess these non-linear results, the Forchheimer relationship was used to predict the flow rate at the imposed hydraulic heads. As the width of the fracture could not be used as input into the equation, due to the lack of saturation across its width, the width of the flow path was used instead. This resulted in the predicted results comparing well with the measured flow rates, and indicates that the Forchheimer relationship can potentially be used to describe unsaturated flow in discrete, open fractures.