Measurements for the Jasper Program intermediate heat exchanger experiment

Abstract

A. ShonoThis report has been reproduced directly from the best available copy.Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; prices available from (615) 576-840 1, FTS 626-840 1. I IThis report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, corn pleteness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. (IVFS) experiment. This modifier was followed by mockups representative of three different off-axial locations that were being considered for placement of the IHX vessel. ORNUTM-12064The PNC plan was concerned with the effort of surrounding a mockup of the sodium containing IHX vessel by a partial or full component boron carbide (B4C) shield.