Mechanical Performance Study of PVA Fiber-Reinforced Seawater and Sea Sand Cement-Based Composite Materials

Abstract

Due to the swift progress in the construction sector, there is a global concern about the potential scarcity of river sand and freshwater resources. The development of new construction materials is considered an inevitable trend for industry growth. PVA fibers, known for their strong corrosion resistance, cost-effectiveness, and high toughness, have the potential to enhance the corrosion resistance and seismic performance of structures in marine environments. However, their mechanical properties and durability in the seawater and sea sand environment are not well understood. Therefore, the investigation of the impact of seawater and sea sand on the mechanical properties and durability of PVA fiber-reinforced cement composites is considered crucial. A mechanical performance analysis of PVA fiber-reinforced seawater and sea sand fiber cement composites was conducted in this study. PVA fiber volume fractions of 0%, 0.75%, and 1.5%, cement composite matrix strength grades of C30 and C50, and curing periods of 28 days, 90 days, and 180 days were examined, investigating their influence on the bending toughness of PVA fiber-reinforced seawater and sea sand cement composites. Material failure modes, crack propagation patterns, and load-deflection curves were obtained through experiments, and various bending toughness indices of the beams were calculated. Specific conclusions include the influence of different seawater concentrations at different curing periods on the initial cracking load and bending toughness of materials with varying strength grades and fiber content; the formulation of calculation formulas for predicting bending strength and corresponding deflection, which fit well with the experimental results; and the development of a calculation model for the bending toughness index of PVA fiber-reinforced seawater and sea sand cement composites, providing an effective prediction of material bending toughness.