Mechanical properties of polymer composite films with ZnO nanoparticles synthesized in low-temperature plasma under ultrasonic cavitation

Abstract

In this study, polymer nanocomposite materials consisting of the copolymer of ethylene and vinyl acetate as a matrix and nanoparticles of zinc oxide as a filler have been obtained and examined by physicochemical and mechanical methods. Zinc oxide nanoparticles used in this study were fabricated using the plasma discharge under the effect of intensive ultrasonic cavitation. To ensure that resulting nanocomposites will acquire homogeneous distribution of filler nanoparticles, solution technology was utilized followed by the melt compounding technique, and also nanoparticles treated and non-treated with ultrasound were applied. The fabricated samples of nanocomposite material films were examined by X-ray phase analysis, then X-ray fluorescence analysis as well as scanning electron microscopy. The differences between the samples were demonstrated: when the nanoparticles without ultrasonic treatment were used, the particles were found to be more strongly aggregated within the bulk of the composite material and the average size of particles was visually larger in comparison to the sample filled with nanoparticles subjected to ultrasonic action. Finally, studies of the tensile strength and relative deformation of the samples were carried out. From the results of mechanical tests, it can be seen that, according to both studied parameters, there is an optimal concentration of ZnO nanoparticles. For tensile strength, the highest result was obtained at a concentration of nanoparticles of 3%, and for the relative elongation to rupture of the sample, the highest value was achieved at a concentration of nanoparticles of 2%.