Microstructure and Pitting Corrosion Resistance of AISI 430 Ferritic Stainless Steel Joints Fabricated by Ultrasonic Vibration Assisted Cold Metal Transfer Technique

Abstract

The influences of ultrasonic vibration during cold metal transfer welding process on the microstructure, element distribution and pitting resistance of AISI 430 ferritic stainless steel joints with ER 308L as filler metal were investigated. The combined effects of mechanical vibration, acoustic streaming and cavitation of ultrasonic vibration significantly refined the primary ferrite grain in the weld metal and then impacted the subsequent solid-phase transition process, leading to the ~45% reduction of ferrite content in the weld metal. Moreover, these effects also resulted in the homogenization of alloying elements in the weld metal. The pitting corrosion resistance of the welded joints with ultrasonic vibration was increased compared with that of without ultrasonic vibration, but lower than the base metal. The pitting resistance of the weld metal with ultrasonic vibration was higher than that of the weld metal without ultrasonic vibration and base metal, while that of the one without ultrasonic vibration was lower than the base metal.