Model Sensitivity Analysis for Coastal Morphodynamics: Investigating Sediment Parameters and Bed Composition in Delft3D

Abstract

Numerical simulation of sediment transport and subsequent morphological evolution rely on accurate parameterizations of sediment characteristics. However, these data are often not available or are spatially and/or temporally limited. This study approaches the problem of limited sediment grain-size data with a series of simulations assessing model sensitivity to sediment parameters and initial bed composition configurations in Delft3D, leading to improved modeling practices. A previously validated Delft3D sediment transport and morphology model for Dauphin Island, Alabama, USA, is used as the benchmark case. A method for the generation of representative sediment grain sizes and their spatially varying distributions is presented via end-member analysis of in situ surficial sediment samples. Derived sediment classes and their spatial distributions are applied to two sensitivity case simulations with increasing bed composition complexity. First, multiple sediment classes are applied in a single fully mixed layer, regardless of sediment type. Second, multiple sediment classes are applied in a thin, fully mixed transport layer with underlayers containing only the non-cohesive sediment classes below. Simulations were carried out in a probabilistic, Delft3D MorMerge configuration to capture long-term morphology change for 10 years. We found there is sensitivity to the inclusion of additional sediment classes and sediment distribution made evident in bed level and morphology change. Inclusion of highly mobile fine sediments altered model results in each sensitivity case. The model was also found to be sensitive to initial bed composition in terms of bed level and morphology change, with notable differences between sensitivity cases on decadal timescales, indicating an armoring effect in the second sensitivity case, which used the transport and underlayer bed configuration. The results of this study offer guidance for numerical modelers concerned with sediment behavior in coastal and estuarine environments.