Modeling Energy LED Light Consumption Based on an Artificial Intelligent Method Applied to Closed Plant Production System

Abstract

Artificial lighting is a key factor in Closed Production Plant Systems (CPPS). A significant light-emitting diode (LED) technology attribute is the emission of different wavelengths, called light recipes. Light recipes are typically configured in continuous mode, but can also be configured in pulsed mode to save energy. We propose two nonlinear models, i.e., genetic programing (GP) and feedforward artificial neural networks (FNNs) to predict energy consumption in CPPS. The generated models use the following input variables: intensity, red light component, blue light component, green light component, and white light component; and the following operation modes: continuous and pulsed light including pulsed frequency, and duty cycle as well energy consumption as output. A Spearman’s correlation was applied to generate a model with only representative inputs. Two datasets were applied. The first (Test 1), with 5700 samples with similar input ranges, was used to train and evaluate, while the second (Test 2), included 160 total datapoints in different input ranges. The metrics that allowed a quantitative evaluation of the model’s performance were MAPE, MSE, MAE, and SEE. Our implemented models achieved an accuracy of 96.1% for the GP model and 98.99% for the FNNs model. The models used in this proposal can be applied or programmed as part of the monitoring system for CPPS which prioritize energy efficiency. The nonlinear models provide a further analysis for energy savings due to the light recipe and operation light mode, i.e., pulsed and continuous on artificial LED lighting systems.

Cost-Effective and Portable Instrumentation to Enable Accurate pH Measurements for Global Industry 4.0 and Vertical Farming Applications

“…Due to the fact that minimal increments in sensor readings convert into significant pH variations, such instabilities impact significantly the recovered values. Our group has recently proposed an artificial intelligence (AI) approach to compensate for these types of scenarios [43,44].…”

The Use of Artificial Neural Networks for Determining Values of Selected Strength Parameters of Miscanthus × Giganteus

“…ANNs are also employed to control and predict variables in agricultural drying processes, e.g., to identify the dynamics of said processes for tomato, tobacco and willow woodchips [45,66]. Feed-forward artificial neural networks were used to predict energy consumption in closed production plant systems [67]. One very important application area of artificial neural networks in agriculture is the modeling of the greenhouse environment (the greenhouse system is non-linear and variable with time) [68].…”

ANN Controller Design and Comparison with Other Equivalent Controllers for Low Cost Sustainable and Precise IndoorLighting Design Using Simultaneous Dual Control to Adjust Artificial Lighting and Daylight Harvesting

“…Also, the method is not validated for different rooms' configurations. In closed plant production system (CPPS) application, the authors in [13] proposed an ANN that is built for CPPS with LED lighting system to estimate the energy consumption using light intensity, red light component, blue light component, green light component, white light component, pulse frequency and duty cycle of input variables. This proposed ANN can be integrated in the plant monitoring system to prioritize the energy efficiency.…”