Molecular Simulation on Permeation Behavior of CH4/CO2/H2S Mixture Gas in PVDF at Service Conditions

Abstract

Reinforced thermoplastic composite pipes (RTPs) have been widely used for oil and gas gathering and transportation. Polyvinylidene fluoride (PVDF) has the greatest potential as a thermoplastic liner of RTPs due to its excellent thermal and mechanical properties. However, permeation of gases is inevitable in the thermoplastic liner, which may lead to blister failure of the liner and damage the safe operation of the RTPs. In order to clarify the permeation behavior and obtain the permeation mechanism of the mixture gas (CH4/CO2/H2S) in PVDF at the normal service conditions, molecular simulations were carried out by combining the Grand Canonical Monte Carlo (GCMC) method and the Molecular Dynamics (MD) method. The simulated results showed that the solubility coefficients of gases increased with the decrease in temperature and the increase in pressure. The adsorption isotherms of all gases were consistent with the Langmuir model. The order of the adsorption concentration for different gases was H2S > CO2> CH4. The isosteric heats of gases at all the actual service conditions were much less than 42 kJ/mol, which indicated that the adsorption for all the gases belonged to the physical adsorption. Both of the diffusion and permeation coefficients increased with the increase in temperature and pressure. The diffusion belonged to Einstein diffusion and the diffusion coefficients of each gas followed the order of CH4 > CO2 > H2S. During the permeation process, the adsorption of gas molecules in PVDF exhibited selective aggregation, and most of them were adsorbed in the low potential energy region of PVDF cell. The mixed-gas molecules vibrated within the hole of PVDF at relatively low temperature and pressure. As the temperature and pressure increase, the gas molecules jumped into the neighboring holes occasionally and then dwelled in the holes, moving around their equilibrium positions.

Cellulose Membranes: Synthesis and Applications for Water and Gas Separation and Purification

“…The volume of a polymer comprises the volume occupied by polymer chains and the free volume between them in the form of "holes". These spaces are dynamic and constantly fluctuate in size and shape due to the thermal motion of the polymer chains and are crucial for the movement of small molecules, ions, or segments of the polymer chains themself [19]. Except for the effects of molecular sizes, critical temperature is a measure of the ease of condensation for gaseous molecules and the solubility increases with it.…”

Analysis of Permeation of Low‐Molecular‐Weight Hydrocarbons through Polyolefins for Testing of a New Developed Method

“…[13] The required energy for the separation of the polymer chains for a diffusion jump is provided by the activation energy of the diffusion process. [14][15][16] It is obvious that larger molecules need larger cavities for their diffusion through the material and the activation energy is increasing. This leads to a decreasing diffusion coefficient with increasing molecular volume.…”

Trajectory-Extending Kinetic Monte Carlo Simulations to Evaluate Pure and Gas Mixture Diffusivities through a Dense Polymeric Membrane

“…There are also ongoing efforts to redefine and increase the upper limits for different materials. − With a wide range of data available, machine learning techniques have also been leveraged to understand and find materials that can surpass the Robeson upper bounds . Recent attempts to address mixture diffusivities from MD simulations showed that gas molecules tend to oscillate between adsorption sites, making it difficult to evaluate the long time gas diffusivity. Since the evaluation of diffusion coefficients in mixtures is challenging, several studies have evaluated the permeabilities using pure component diffusion coefficients.…”