Monitoring Suhu pada Infant Warmer Menggunakan INCU Analyzer Berbasis Arduino

Abstract

<em>Temperature is the most important parameter in monitoring Infant Warmer medical equipment. In this study, temperature monitoring was carried out on the Lullaby GE Infant Warmer using INCU based on Arduino Uno. The temperature setting used was 34 ° C, 35 ° C, 36 ° C and 37 ° C with each setting repeated 3 times. The temperature sensor used in the INCU analyzer for T1 to T4 is DS18B20, while the T5 uses a DHT22 temperature sensor. At the Infant Warmer temperature, a low error value was obtained for all temperature settings, namely a temperature of 34 ° C with an error of 0.02, a temperature of 35 ° C with an error of 0.03, a temperature of 36 ° C with an error of 0.004 and a temperature of 37 ° C with an error of 0. The INCU analyzer output low temperature is at T5, with temperature settings of 34 ° C, 35 ° C, 35 ° C and 37 ° C respectively 0.009, 0.07, 0.11 and 0.28. While the error value on T1 to T4 ranges from 0.37, namely at T3 for a temperature setting of 35 ° C to 0.84, namely at T3 for a setting of 37 ° C. It can be concluded that the INCU analyzer that has a high degree of accuracy is the T5 using the DHT22 temperature sensor.</em>

Implementation of IoT of an Electric Infant Warmer to Prevent Hypothermia in Newborns

“…This also happened in the previous study, the difference in temperature sensor measurements was only about 0.13-0.182°C with the largest error of the system reaching 0.517% [33] and other studies achieved an error rate of only 0.28% [25]. Then based on other research, the results obtained for the error value were also less than 0.5°C [34]- [36]. The error value obtained from the DS18B20 sensor measurement was about 1% [37] [38] or 0.3°C.…”

“…The error value obtained from the DS18B20 sensor measurement was about 1% [37] [38] or 0.3°C. The previous research also stated the results of the error value which obtained an error value of around 0.15 -0.29°C [39], 1.02% [21], 0.06% [16], 0.37% [36], and 2.18% [23]. These studies, in measuring temperature, calibrate with the same Incubator Analyzer tool used in this study.…”

Kalibrator Infant Warmer Berbasis Arduino Uno Dilengkapi dengan Penyimpanan Data

“…Dalam kehidupan sehari-hari masyarakat untuk mengukur suhu cenderung menggunakan indra peraba. Tetapi dengan adanya perkembangan teknologi maka diciptakanlah termometer untuk mengukur suhu dengan valid [3].…”