Monte Carlo simulation for designing collimator of neutron diffractometer facility in Malaysia

Abstract

Neutron diffraction (ND) is an application of non-destructive test which involves the process of interference between neutron and atoms within materials. This technique has drawn many attentions especially in industrial, metallurgical and nuclear sectors. Neutron diffractometer system (NDS) is a system which includes all the instrumentation to perform ND technique. One of the most important instruments in NDS set-up is neutron collimator which is used to reduce the size and steer the direction of the beam. Generally, neutron collimator used in NDS is based on step convergent collimator type. Currently, the NDS facility is planned to be built at one of the radial beam port of TRIGA MARK II PUSPATI research reactor (RTP) in Malaysia. The aim of this research is to characterize the materials suitable for neutron collimator and to obtain the ideal geometry for neutron collimator design. In order to achieve these aims, several neutron collimators with different geometries have been designed using Monte Carlo Simulation Codes MCNPX. The results are then compared to obtain the best design with high thermal neutron flux and low gamma contamination at the object plane. This research may be useful in the selection of neutron collimator design for NDS facility at TRIGA research reactor.

High-Resolution Powder Diffractometer Facility (HRPDF) for Low and Medium Power Research Reactor

“…In order to obtain a high instrumental resolution, it is necessary to use a radial collimator, as it helps in focusing the diffraction pattern. See, for example, the simulation of collimation in [28] presented in Fig. 3.…”