Nanomechanics of Retained Austenite in Medium-Carbon Low-Temperature Bainitic Steel: A Critical Analysis of a One-Step versus a Two-Step Treatment

Abstract

A two-step bainitic treatment with a final isothermal temperature below MS was adopted to obtain bainitic steel with abundant retained austenite (RA). Nanoindentation testing was used to investigate the stability of RA in bainite steel and clarify the effect of RA on the deformation of medium-carbon steel. The results showed that, in contrast to the traditional one-step approach, a greater amount of nanoscale RA film was obtained using the two-step treatment. This was due to a lower final bainitic transformation temperature, which induced a higher carbon concentration in the untransformed austenite in the stasis stage; this resulted in untransformed austenite with a higher carbon content existing as RA rather than forming martensite in the subsequent cooling process. In addition, it was determined that the increased stability of RA during the two-step transformation delayed the pop-in point.