New Model and Finite Element Analysis of the Anti-Extrusion Strength of Backfill Drilling Pipelines

Abstract

Currently, in some domestic and foreign mines, the backfill drilling pipeline experiences a rupture phenomenon even when the wear degree is low. This results in a delay in production due to the filling becoming ‘sick’. This paper presents, for the first time, the damage mechanism from a mechanical perspective and re-derives the anti-extrusion strength model of the backfill drilling pipeline. We investigate the influence of the law on the anti-extrusion strength of pipelines from the perspective of strata and cement rings. We then verify the theoretical and simulation results through engineering examples. The results demonstrate that the Mises stress criterion is a suitable modification principle for the anti-extrusion strength model of the backfill drilling pipeline. The anti-extrusion strength of the pipeline is related to the elastic modulus and Poisson’s ratio of the stratum, and the thickness of the cement ring. It is negatively affected by the depth of the stratum. For hard strata, a cement ring with a smaller elastic modulus is suitable, while for soft stratum, a cement ring with a larger elastic modulus is recommended. When the missing angle of the cement ring is less than 60°, the stress concentration factor increases up to 2.2. The stress unloading capacity of the cement ring ranges from 32.7% to 37.8%, and optimal performance of the cement ring is achieved when it has high strength and low rigidity. The backfill filling pipeline of a copper mine abroad was destroyed due to external extrusion force exceeding its anti-extrusion strength value. The modified pipeline anti-extrusion strength model is 18.2% higher than the pipeline API strength value. This finding can inform the design of the backfill filling pipeline for China’s kilometer-deep wells in the future.