Non-Contact Sensor for Long-Term Continuous Vital Signs Monitoring: A Review on Intelligent Phased-Array Doppler Sensor Design

Abstract

It has been the dream of many scientists and engineers to realize a non-contact remote sensing system that can perform continuous, accurate and long-term monitoring of human vital signs as we have seen in many Sci-Fi movies. Having an intelligible sensor system that can measure and record key vital signs (such as heart rates and respiration rates) remotely and continuously without touching the patients, for example, can be an invaluable tool for physicians who need to make rapid life-and-death decisions. Such a sensor system can also effectively help physicians and patients making better informed decisions when patients’ long-term vital signs data is available. Therefore, there has been a lot of research activities on developing a non-contact sensor system that can monitor a patient’s vital signs and quickly transmit the information to healthcare professionals. Doppler-based radio-frequency (RF) non-contact vital signs (NCVS) monitoring system are particularly attractive for long term vital signs monitoring because there are no wires, electrodes, wearable devices, nor any contact-based sensors involved so the subjects may not be even aware of the ubiquitous monitoring. In this paper, we will provide a brief review on some latest development on NCVS sensors and compare them against a few novel and intelligent phased-array Doppler-based RF NCVS biosensors we have built in our labs. Some of our NCVS sensor tests were performed within a clutter-free anechoic chamber to mitigate the environmental clutters, while most tests were conducted within the typical Herman-Miller type office cubicle setting to mimic a more practical monitoring environment. Additionally, we will show the measurement data to demonstrate the feasibility of long-term NCVS monitoring. The measured data strongly suggests that our latest phased array NCVS system should be able to perform long-term vital signs monitoring intelligently and robustly, especially for situations where the subject is sleeping without hectic movements nearby.

Study on Mutual Coupling Reduction Technique for MIMO Antennas

“…In [5]- [10], different printed MIMO antenna systems are presented. These antennas are widely used in the portable systems; such as mobile phones due to their conformity with the device, low cost, better integrity and ease of fabrication.…”

Doppler Radar-Based Non-Contact Health Monitoring for Obstructive Sleep Apnea Diagnosis: A Comprehensive Review

“…There have also been numerous reviews, comparison studies [16][17][18][19], and smart systems designs [20,21] regarding unobtrusive [22], nonintrusive [23], and non-contact physiological vital signs monitoring for sleep monitoring. However, a comprehensive review of the non-contact Doppler radar for health monitoring for OSA diagnosis has been limited.…”

A System for Monitoring Breathing Activity Using an Ultrasonic Radar Detection with Low Power Consumption

“…Each of these techniques, however, requires different process monitoring and has benefits and drawbacks that may make it more or less appealing to use under different circumstances as discussed in reference [51]. More details about the relevant techniques can be found in references [52,53]. Among the promising techniques for monitoring breathing activity, an ultrasonic radar detection method offers an accuracy, remote sensing and cheap in price.…”