Nonlinear Inelastic Stability Behavior of High-Strength Stainless Steel I-Beams with Sinusoidal Web Openings

Abstract

Perforated beams can bring countless benefits compared to traditional plain-webbed beams. However, steel beams with sequential web openings are more susceptible to instabilities, and special care must be taken in a design concerning the failure modes these structures can present. The study presented herein explicitly dealt with the stability behavior of perforated beams with sinusoidal openings. This type of perforated member features smooth-lined openings constructed from a single thermal cut in conventional plain-webbed steel profiles. A broad study was carried out through numerical simulation using the ABAQUS software, in which perforated profiles manufactured with S600E high-strength stainless steel were studied. The use of high-strength steels in perforated profiles is a little explored topic in the literature, despite having a significant impact on the behavior of these elements. With the study carried out, a broad overview of the stability behavior of these members was obtained, especially concerning global stability. A total of 5940 FE models were developed, considering the application of different types of loads. In these models, linear buckling analysis (LBA) and geometrically and materially nonlinear analysis with imperfections (GMNIA) were performed. The results obtained were compared with international design codes, and it was found that some codes fail to represent the behavior of members that present lateral-distortional buckling (LDB) and interactions between local and global failure modes. This behavior is a significant design concern since the studied members had high yield strength, making them more susceptible to interaction-governed failure modes than usual-yield strength members. Additionally, the study found that some design codes do not accurately represent the behavior of members loaded outside the shear center due to the destabilizing effect of loading on these structures.