Numerical Optimization of Drilling Parameters for Gas Predrainage and Excavating-Drainage Collaboration on Roadway Head

Abstract

In order to improve efficiency of gas drainage, the reasonable layout parameters for borehole on roadway head are investigated. Assuming that the coal mass has a dual pore structure with fractures and pores, a multiphysical field coupling mathematical model is proposed for gas drainage. The governing equations of gas adsorption, seepage, and diffusion are considered. The process of gas preextraction and excavating-extraction collaboration on roadway heading face in 2606 haulage roadway of Zhangcun mine is modeled by finite element (FE) method. The effects of gas drainage under different drilling arrangements are analyzed. The results show that the fastest decreasing rate of gas content occurs at the beginning of drainage, and decreasing rate of gas content tends to be stable in the later stage. After removing the predraining on roadway head, the gas content at the center of coal wall on the roadway heading face will rebound. The included angle between the borehole and the roadway middle line determines the spatial area of gas drainage. Too small included angle will reduce the area of gas content reduction, while too large included angle will result in a blind area on both sides of the roadway. The change in borehole spacing affects the decreasing rate of gas content in the rock and coal around the roadway. Large spacing may cause an inadequate decreasing rate in the middle of the roadway, while small spacing may cause an inadequate decreasing rate in both sides of the roadway. In the field application, the pure gas flow and gas concentration of drainage show a downward trend in whole. The gas concentration decreased from 13.2% to 10.8%, and the pure gas flow decreased from 10.6 m3/min to 8.15 m3/min. Research achievements can provide a basis for gas drainage in underground roadway.

Research on Hydraulic Fracturing Pressure Relief and Improvement Permeability Technology of the Soft Coal Seam Roof

“…The porosity of the coal seam is closely related to the stress state, mechanical properties, and adsorption properties of the coal seam during the hydraulic fracturing of the roof. The porosity of the coal seam can be expressed as − φ = φ 0 exp { − C normalp false[ ( σ − σ 0 ) − ( p normalg − p g 0 ) false] + false( 1 − γ false) ε normala 3 } …”

“…The porosity of the coal seam is closely related to the stress state, mechanical properties, and adsorption properties of the coal seam during the hydraulic fracturing of the roof. The porosity of the coal seam can be expressed as 26 − 28 …”

Modelling of enhanced gas extraction in low permeability coal seam by controllable shock wave fracturing

“…• The complex physical process acting on the solid is simplified as the stress boundary treatment of pressure changing with time. (2) In the process of gas extraction from coal seam [28][29] :…”

Research advances in enhanced coal seam gas extraction by controllable shock wave fracturing

“…The assumptions on the gas migration related physical properties (Fan et al 2021a;Luo et al 2022): (1) Coal is a porous elastic medium including pores and fractures; (2) The gas migration in the matrix is driven by the concentration gradient, which conforms to the Fick diffusion law; and the gas migration in fractures is driven by pressure gradient, which is consistent with the Darcy's law; (3) CH 4 is regarded as an ideal gas, which ignores the gas gravity and takes the gas slippage effect into consideration; (4) Water in coal and rock only exists and migrates in fractures; (5) The adsorption and desorption of CH 4 in coal is completed at constant temperature.…”