Numerical simulation of air flow and distribution in the blast system of blast furnace

Abstract

A three-dimensional geometric model of the blast system of the 5500 m3 blast furnace was established in this study. The velocity distribution of the blast system was calculated by OpenFOAM, and the velocity distribution at cross sections of the round pipe and the branch pipe was analysed. The main conclusions are as follows: (1) When the hot air enters the branch pipe, the air flow speed gradually increases and reaches its maximum value (approximately 266.7 m/s) at the tuyere outlet. (2) When the hot air enters the round pipe from the main pipe, there is momentum loss. When the hot air further reaches the opposite side of the junction between the round pipe and the main (Tuyere 1#), the speed of the hot air in the round pipe decreases to the minimum. (3) The maximum air flow average speed of the tuyere outlet is located at Tuyeres 20# and 21# at the junction of the main pipe and the round pipe, which can reach 264.5 m/s. The minimum air flow average velocity of the tuyere outlet is located at Tuyeres 19# and 22#, approximately 258.5 m/s.