Numerical simulation of multilayer deposition in an obstructed channel flow

RANS modeling for particle transport and deposition in turbulent duct flows: Near wall model uncertainties

“…The results of the helicity-EIM model were of similar accuracy compared to those of Wang and James (1999). Recently, Lecrivain et al (2014) have studied multi-layer deposition in an obstructed channel flow using a variant of anisotropic CRW model. The numerical results were in good accordance with the on-site wind tunnel experiments.…”

Effects of rib spacing and height on particle deposition in ribbed duct air flows

“…(12) was adopted. This equation has been successfully applied for multilayer deposition simulation of a ribbed duct flow by Lecrivain et al [10], as follows:…”

A numerical study of particle deposition in ribbed duct flow with different rib shapes

“…(21) had been successfully applied in multilayer deposition simulation on ribbed channel flow by Lecrivain et al [14]. This correction was also employed in the present simulation.…”

“…The results showed that spherical particles are preferentially concentrated on the windward rib surface while non-spherical particles don't. Lecrivain et al [14] predicted multilayer particle deposition in square ribbed channel flow by Reynolds-averaged NaviereStokes (RANS) model. The results showed good agreement with experimental test data.…”