Numerical Simulation on Optimization of Process Parameters for Free Bending of Metal Tubes

The printing quality of biological scaffold is not only affected by the fluidity of bio-ink but also by the printing process parameters, such as the size of the needle, printing height, extrusion speed, and printing speed. Therefore, optimizing the printing process parameters can further improve the molding quality of the biological scaffold. In this study, the printing and deposition process of sodium alginate hydrogel was modeled and analyzed based on the Herschel–Bulkley model by the finite element simulation method. The orthogonal experiment method, control variable method, and response surface method were used to design experiments, and the influences of different printing process parameters on the hydrogel deposition process were investigated. Finally, the optimal combination of printing process parameters was obtained by taking the molding degree and offset of the hydrogel line as optimization objectives. The results show that the strength relationship of the factors affecting the molding degree of the hydrogel line is as follows: printing height > needle diameter > printing speed > extrusion speed, and the strength relationship of the factors affecting the printing offset is as follows: printing height > needle diameter > extrusion speed > printing speed. The optimal combination of printing process parameters is d = 0.34 mm, H = 0.51 mm, v1 = 10 mm/s, and v2 = 7.91 mm/s. Compared with the printing experiment results of the hydrogel line molding degree under the optimal process parameters, the error range is within −11.55%–1.27%, which further demonstrates the reliability of the optimization method of hydrogel extrusion printing process parameters based on numerical simulation and response surface method.

show abstract

Computational Methodology for the Development of Wrinkled Tubes by Plastic Deformation

Soares,

Silva,

Fonseca

2024

Applied Sciences

View full text Add to dashboard Cite

Traditional methods for wrinkled tubes involve welding processes and additional elements, such as plates, screws, rivets, and guides. Considering all the limitations of these processes, this work aims to propose a methodology that allows for maximising the manufacturing process of carbon steel tube joints with seaming using cold forming and minimising the cost of the final product. Therefore, the present work aims to develop a computational model, based on the finite element method, to optimise the deformation process of T6 Aluminium tubes (ø 45 × ø 38.6 mm) with a length of 120 mm. The method uses a steel die with cavities to achieve wrinkled tubes by a forming process. This numerical study was carried out using the Ansys® 2022 R2 software. A nonlinear material and an incremental structural analysis were used. The applied methodology allowed the optimisation of process parameters, the application of forces during tube deformation, the geometry of the die cavity, boundary conditions, and mesh discretisation. Numerical modelling was carried out using the axial symmetry of the assembly (tube–die), enabling a simplified and efficient execution of the final tube geometry. The results were analysed based on the maximum pressure applied to the tube, and the vertical and horizontal displacements of the deformed component, thus obtaining the tube flow with complete filling inside the die cavity at the end of deformation. The die geometry that produced the best results presented a cavity with a radius of curvature of 3 mm, 6 mm in height, and with a depth of 4 mm. The optimised result of the die geometry generated satisfactory results, with the displacement on the x-axis of the tube of approximately 2.85 mm, ensuring the filling of the cavity at the end of the process. For this, the maximum pressure exerted on the tube was approximately 374 MPa.

show abstract

scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.

Contact Info

customersupport@researchsolutions.com

10624 S. Eastern Ave., Ste. A-614

Henderson, NV 89052, USA

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Blog Terms and Conditions API Terms Privacy Policy Contact Cookie Preferences Do Not Sell or Share My Personal Information

Made with 💙 for researchers

Part of the Research Solutions Family.

Numerical Simulation on Optimization of Process Parameters for Free Bending of Metal Tubes

Cited by 3 publications

References 20 publications

Forming method and cross-section deformation of transition section of finned special-shaped tubes in 3D free bending technology

Forming method and cross-section deformation of transition section of finned special-shaped tubes in 3D free bending technology

Optimization of hydrogel extrusion printing process parameters based on numerical simulation

Computational Methodology for the Development of Wrinkled Tubes by Plastic Deformation

Contact Info

Product

Resources

About