Numerical simulations on shear behaviour of rock joint network under constant normal stiffness conditions

Abstract

In this study, the numerical direct shear tests were conducted to investigate the shear mechanical properties of joint networks under constant normal stiffness (CNS) boundary conditions. The influence of random joint number on shear stress (τ), dilation (normal displacement, δv) and normal stress (σn) of rock mass were studied quantitatively with fixed main slip surface. At the same time, the internal stress evolution process and failure process were analyzed. The results reveal that the number of random joints (γ) has little effect on the shear and normal stresses. The normal displacement of the sample generally decreases as the number of random joints increases. In addition, the normal displacement of the specimen is absorbed by the random joints when the number of random joints in the specimen increases to a certain level: when γ is greater than 6 and the shear displacement (μ) reaching 10 mm, the specimen exhibits shear contraction. Therefore, the internal random joints mainly control the failure mode and dilatancy performance of the specimen, while the main joint of the rock controls the shear stress of the specimen.