Numerical Study of Soil-Thawing Effect of Composite Piles Using GMsFEM

Abstract

During construction works, it is advisable to prevent strong thawing and an increase in the moisture content of the foundations of engineering structures in the summer. Since the density of water and ice differ, due to the difference bulging of the foundation sections can occur when it freezes back in winter. In this work, the effect of fiber-reinforced piles on the thermal field of the surrounding soil is investigated numerically; that is, the study of the influence of aggregates with high and low thermal-physical properties on the temperature of frozen soils is conducted. Basalt and steel fiber reinforcement are compared. The difficulty of this work is that the inclusions inside piles are too small compared to the pile itself. Therefore, to solve the Stefan problem, a generalized multiscale finite element method (GMsFEM) was used. In the GMsFEM, the usual conforming partition of the domain into a coarse grid was used. It allowed reducing problem size and, consequently, accelerating the calculations. Results of the multiscale solution were compared with fine-scale solution, the accuracy of GMsFEM was investigated, and the optimal solution parameters were defined. Therefore, GMsFEM was shown to be well suited for the designated task. Collation of basalt and steel fiber reinforcement showed a beneficial effect of high thermal conductive material inclusion on freezing of piles in winter.

Influence of Variatropy on the Evaluation of Strength Properties and Structure Formation of Concrete under Freeze-Thaw Cycles

“…Another important aspect of studying the durability of concrete is the modeling of reinforced concrete structures, as well as the very mechanism of chloride penetration, considering the heterogeneity of concrete and reinforcement coatings [40,41]. To assess the frost resistance of concrete, as well as products and structures made of it, various methods were used to control the characteristics of concrete (nonlinear resonant vibration diagnostics [42], ultrasonic method [43], numerical study [44]), such as seismic resistance [45], dynamic mechanical properties [46], strength, including its distribution over the thickness of reinforced concrete elements [43].…”