Occupational inhalation exposure during surface disinfection—exposure assessment based on exposure models compared with measurement data

Abstract

Background For healthcare workers, surface disinfections are daily routine tasks. An assessment of the inhalation exposure to hazardous substances, in this case the disinfectant´s active ingredients, is necessary to ensure workers safety. However, deciding which exposure model is best for exposure assessment remains difficult. Objective The aim of the study was to evaluate the applicability of different exposure models for disinfection of small surfaces in healthcare settings. Methods Measurements of the air concentration of active ingredients in disinfectants (ethanol, formaldehyde, glutaraldehyde, hydrogen peroxide, peroxyacetic acid) together with other exposure parameters were recorded in a test chamber. The measurements were performed using personal and stationary air sampling. In addition, exposure modelling was performed using three deterministic models (unsteady 1-zone, ConsExpo and 2-component) and one modifying-factor model (Stoffenmanager®). Their estimates were compared with the measured values using various methods to assess model quality (like accuracy and level of conservatism). Results The deterministic models showed overestimation predominantly in the range of two- to fivefold relative to the measured data and high conservatism for all active ingredients of disinfectants with the exception of ethanol. With Stoffenmanager® an exposure distribution was estimated for ethanol, which was in good accordance with the measured data. Impact statement To date, workplace exposure assessments often involve expensive and time consuming air measurements. Reliable exposure models can be used to assess occupational inhalation exposure to hazardous substances, in this case surface disinfectants. This study describes the applicability of three deterministic and one modifying-factor model for disinfection of small surfaces in healthcare settings, in direct comparison to measurements performed and will facilitate future exposure assessments at these workplaces.