2014
DOI: 10.1364/oe.22.029404
|View full text |Cite
|
Sign up to set email alerts
|

Optical injection locking of monolithically integrated photonic source for generation of high purity signals above 100 GHz

Abstract: A monolithically integrated photonic source for tuneable mmwave signal generation has been fabricated. The source consists of 14 active components, i.e. semiconductor lasers, amplifiers and photodetectors, all integrated on a 3 mm 2 InP chip. Heterodyne signals in the range between 85 GHz and 120 GHz with up to -10 dBm output power have been successfully generated. By optically injection locking the integrated lasers to an external optical comb source, high-spectral-purity signals at frequencies >100 GHz have … Show more

Help me understand this report

Search citation statements

Order By: Relevance

Paper Sections

Select...
1
1
1
1

Citation Types

1
26
0

Year Published

2015
2015
2022
2022

Publication Types

Select...
9

Relationship

5
4

Authors

Journals

citations
Cited by 52 publications
(27 citation statements)
references
References 17 publications
1
26
0
Order By: Relevance
“…Using the dashed lines for each type of signal (for the case w/ the KK receiver we assume the penalty remains constant and extrapolate the value obtained when no linewidth emulation is performed), one can see that the penalty of BB signals becomes higher than that of the SSB signals, both w/o and w/ KK receiver, for a (ΔνT) product of approximately 1.110 −4 . Assuming a linewidth for the RAU laser of 2 MHz (which is similar to the ones reported for foundry-fabricated DFB lasers [30]) and of 100 kHz for the laser in the CO (linewidth of off-the-shelf ECL lasers), a combined linewidth of 2.1 MHz is obtained, which, solving for T −1 , yields a symbol rate of approximately 19 GBd. For symbol rates lower than this, the envelope detection of SSB signals should be more effective.…”
Section: B Linewidth Tolerancementioning
confidence: 62%
“…Using the dashed lines for each type of signal (for the case w/ the KK receiver we assume the penalty remains constant and extrapolate the value obtained when no linewidth emulation is performed), one can see that the penalty of BB signals becomes higher than that of the SSB signals, both w/o and w/ KK receiver, for a (ΔνT) product of approximately 1.110 −4 . Assuming a linewidth for the RAU laser of 2 MHz (which is similar to the ones reported for foundry-fabricated DFB lasers [30]) and of 100 kHz for the laser in the CO (linewidth of off-the-shelf ECL lasers), a combined linewidth of 2.1 MHz is obtained, which, solving for T −1 , yields a symbol rate of approximately 19 GBd. For symbol rates lower than this, the envelope detection of SSB signals should be more effective.…”
Section: B Linewidth Tolerancementioning
confidence: 62%
“…These have led to important progresses for the field of THz communications with highlights such as the development of a single chip transmitter (Fig. 4a) emitting 100 µW at 100 GHz from a total electrical consumption of 1W including cooling 74,75 . That chip was also used successfully in transmission systems 76 .…”
Section: Future Prospect and Challengesmentioning
confidence: 99%
“…A schematic of the experimental setup is shown in Figure 3 [11,16,17]. The output of each SFP was fibre coupled using a lensed fibre.…”
Section: Off-chip Experimental Setupmentioning
confidence: 99%