Optical, thermal, and mechanical properties of (Y1−xScx)2O3 transparent ceramics

Abstract

Sesquioxides such as Y2O3 and Sc2O3 are important optical materials, but the fabrication of their transparent ceramics remains a challenge due to the ultra-high melting point of over 2400 °C. In this work, a series of (Y1−xScx)2O3 transparent ceramics were successfully fabricated by a simple vacuum sintering process without any sintering additives, and the effect of scandium (Sc) content (x) on the crystal structure and optical/thermal/mechanical properties was evaluated. Y2O3 and Sc2O3 form a complete solid solution with a cubic bixbyite structure. The formation of (Y1−xScx)2O3 solid solution promotes the densification of ceramics, leading to the realization of high transparency close to the theoretical transmittance over a wide wavelength range of 0.35–8 µm. In particular, the in-line transmittance in the range of 0.6–6 µm remains above 80% for (Y1−xScx)2O3 with x = 0.23–0.31, while the pristine Y2O3 and Sc2O3 are opaque. Moreover, the mechanical properties including Vickers hardness (HV), fracture toughness (KIC), and biaxial flexural strength (δb) are evidently enhanced due to the solid solution strengthening, while the thermal conductivity (k) is reduced due to the reduction of photon free path. This study demonstrates that forming of solid solution is a facile and universal approach for preparing sesquioxide transparent ceramics with high optical and mechanical quality.

A review on magneto-optical ceramics for Faraday isolators

“…In the case of FS Faraday isolators, β = θFl = 45°, hence for the forward transmission, IF =I0e -αl , and for the backward transmission, IB = 0. With the rapid development of laser materials and laser systems in recent years [24][25][26][27][28], the output power is increasing day by day in laser devices. High-power lasers have broad application prospects, including laser processing [29], scientific research (e.g.…”

Eu-doped (Y0.85−xLa0.15)2O3sesquioxide transparent ceramics for high-spatial-resolution X-ray imaging

“…Y 2 O 3 is a sesquioxide, and as the main body of the luminescent center, it has the advantages of high corrosion resistance, excellent thermal stability, high refractive index (1.89–1.97), wide range of optical transparency (0.23–8 μm), wide band gap (5.6–6.0 eV), and low radiation leap rate. 28–30 However, given the high sintering temperature of Y 2 O 3 , certain sintering aids need to be added to reduce the sintering temperature. In previous studies, the addition of La 2 O 3 effectively increased the sintering density and improved the transparency of the ceramics.…”

Development of lutetium oxide continuous fibers with excellent mechanical properties

“…The melting point of lutetium oxide (Lu 2 O 3 ) is as high as 2490 ℃, and there is no phase transition below the melting point [1][2][3][4]. The characteristics of corrosion resistance, low phonon energy [5], and high structural tolerance make it promising in the fields of refractory materials [6], catalytic materials [7], superconductivity [8], optics [9][10][11][12][13][14], magnetic materials [10], and highenergy radiation detection [13]. Especially in optics, Lu 2 O 3 has received extensive attention as a promising scintillator candidate material.…”