Optimization of Advanced Support Parameters of Surrounding Rock in Tunnels Constructed by ADECO-RS

Abstract

So as to efficiently address the distortion of surrounding rock in tunnels constructed utilizing ADECO-RS, it is crucial to define suitable parameters for advanced support systems. This study took the 8 # tunnel in the F3 portion of the E60 Expressway in Georgia as an engineering case. Initially, the original support scheme underwent systematic monitoring and analysis in the field. Subsequently, the FLAC3D 6.0 software was employed to examine the influence of the advanced pipe roof and tunnel face fiberglass bolts on the steady state of the surrounding rock. Optimization of the support parameters was also proposed. Further, the sensitivity of different parameters to the distortion of the rock surrounding the tunnel was analyzed and ranked via an orthogonal experiment. Ultimately, the effectiveness of the optimization scheme was evaluated by numerical methods and field observations. The findings of the research indicate the following: (1) The monitoring results of the original support parameters show that the irrational design of the support parameters can bring about deformation non-convergence in the tunnel’s surrounding rock. Support parameters must be optimized. (2) The spacing of the pipe roof is positively correlated with the distortion of the surrounding rock. In contrast, the length and the grouting strength are negatively correlated with the distortion of the surrounding rock. The reinforcement density, length, and lap length of glass fiber bolts exhibit an inverse relationship with the distortion of the surrounding rock. (3) The efficacy of pipe shed grouting in mitigating subsidence and deformation of the vault is superior, followed by the spacing of the supports. In contrast, the length of the supports demonstrates comparatively lesser effectiveness. Under optimal parameters, the vault subsidence was reduced by 23.2%, 10.2%, and 2.0%, respectively. The most significant factor controlling the extrusion deformation of the tunnel face is bolt lap length, followed by reinforcement density and then reinforcement length. Extrusion displacement was reduced by 52.5%, 40.3%, and 9.3%, respectively, under the optimal parameters. (4) In comparison to the primordial support system, the optimized support scheme reduces the subsidence of the vault by about one time and the convergence deformation around the cave by about two times. The research findings offer guidance for analogous engineering support design and parameter optimization.