Performance analyses of helical coil heat exchangers. The effect of external coil surface modification on heat exchanger effectiveness

Abstract

The shell and coil heat exchangers are commonly used in heating, ventilation, nuclear industry, process plant, heat recovery and air conditioning systems. This type of recuperators benefits from simple construction, the low value of pressure drops and high heat transfer. In helical coil, centrifugal force is acting on the moving fluid due to the curvature of the tube results in the development. It has been long recognized that the heat transfer in the helical tube is much better than in the straight ones because of the occurrence of secondary flow in planes normal to the main flow inside the helical structure. Helical tubes show good performance in heat transfer enhancement, while the uniform curvature of spiral structure is inconvenient in pipe installation in heat exchangers. Authors have presented their own construction of shell and tube heat exchanger with intensified heat transfer. The purpose of this article is to assess the influence of the surface modification over the performance coefficient and effectiveness. The experiments have been performed for the steady-state heat transfer. Experimental data points were gathered for both laminar and turbulent flow, both for co current-and countercurrent flow arrangement. To find optimal heat transfer intensification on the shell-side authors applied the number of transfer units analysis.

Experimental investigation on straight and u-bend double tube heat exchanger with active and passive enhancement methods

“…In recent years, investigations aimed at increasing heat transfer efficiency are of primary importance [1,2]. Reducing the energy requirement of energy-intensive systems and also maximization of energy utilization are common subjects of research [3].…”

Experimental validation of pressure drop models during flow boiling of R134a – effect of flow acceleration and entrainment

“…Two-phase flows are associated with large rates of heat transfer because of the latent heat of evaporation and enhancement of the turbulence level between the liquid and the solid surface [8,9]. High heat fluxes can also be obtained by means of numerous enhancement technologies [10][11][12]. Predicting heat transfer coefficient and pressure drop is a challenging task, and has been pursued by various research for decades.…”

Experimental investigation of forced convection of water/EG-Al2O3 nanofluids inside horizontal tube

“…Simultaneously with research aimed at enchancing heat transfer by modifying the construction of a thermal apparatus (change of surface roughness, surface development [1], use of flow turbulence elements) or using additional elements in the installation causing the liquid to pulsate or vibrate, numerous works are carried out to change thermophysical properties of conventional working fluids or proposing new products that can replace traditional liquids. In last two decades strong interest in fluids with suspended nanosize solid particles (called nanofluids) results in large number of experimental and numerical studies.…”