Performance analysis and efficiency enhancement of cooling tower in 210 MW thermal unit

Abstract

Heat exchangers, condensers plays a vital role in any kind of power cycle like modified Rankin cycle, these components involves transfer of both sensible and latent heat and have great influence over the power plant performance. The condenser employed in MTPS involves transfer of latent heat into steam. Yet it as to induce a phase change in thereby forming water. Increase in the effectiveness of condenser resulted in the increase of vacuum in the condenser. Thereby work done by steam is increased and coal saving (per ton of steam production) is achieved. This condensation process results in the formation of sludge’s (temporary) and (permanent). Along the inner periphery of the condenser tubes. These permanent scales have decreased thermal conductivity and inhibit the heat transfer rate. The more the thickness of the scale the less the heat is removed from the steam. This scale formation limits the life of the condenser tubes with maximum performance. In this project the thickness of the scale formed in the condenser tubes is calculated theoretically and the performance is analysed before and after scale formation in the condenser. Different materials which involve less scale formation, different ways of reducing scales and various scale removing methods are suggested.

Reduction of emissions and improvement of dynamic responses of a supercritical clean coal generation unit via neural network inverse control strategy

“…15,16 - Increasing the condenser size. 17,18 - Combustion Optimization and/or control. 19,20 - Fluidized-bed combustion design and control.…”