Performance and Isotherm Studies in Phenol Adsorption From Wastewater Using Low Cost Biomass Derived From Coconut Shells

Abstract

With the growth of urbanization and industrialization, water bodies are getting polluted. Among various pollutants, phenol-based pollutants are common water pollutions which originate from wastewater discharged from processing manufacturing industries like petrochemical refineries, ceramic plants, textile processing, leather processing, synthetic rubbers, etc. These pollutants are toxic and have long-term ill effects on both humans and aquatic animals. Adsorption is well proven technique which is widely used for removal of pollutions from aqueous environments. But this process, is hindered due to the cost of adsorbents especially for large scale continuous processes. In this regard, adsorbents derived from waste biomass can be a great asset to reduce the cost of wastewater treatment. To meet this objective, coconut shells are chosen as biomass which is abundantly available from south east Asia. This biomass is converted into activated carbon and hence used to remove phenol from wastewater. Batch adsorption experiments were performed with different initial concentration, carbon dosage, pH and contact time. At a lower concentration of 50 mg/L of initial feed (phenol) concentration resulted in around 90% phenol removal and henceforth optimum results in phenol removal obtained in only 64%. Experimental results are in good agreement with Langmuir adsorption isotherm model and have shown a better fitting to the experimental data. These studies confirm that the coconut shell-based activated carbon could be used to effectively adsorb phenol from aqueous solutions.