Plasma burn—mind the gap

Abstract

The programme to design plasma scenarios for the Spherical Tokamak for Energy Production (STEP), a reactor concept aiming at net electricity production, seeks to exploit the inherent advantages of the spherical tokamak (ST) while making conservative assumptions about plasma performance. This approach is motivated by the large gap between present-day STs and future burning plasmas based on this concept. It is concluded that plasma exhaust in such a device is most likely to be manageable in a double null (DN) configuration, and that high core performance is favoured by positive triangularity (PT) plasmas with an elevated central safety factor. Based on a full technical and physics assessment of external heating and current drive (CD) systems, it was decided that the external CD is provided most effectively by microwaves. Operation with active resistive wall mode (RWM) stabilization as well as high elongation is needed for the most compact solution. The gap between existing devices and STEP is most pronounced in the area of core transport, owing to high normalized plasma pressure in the latter which changes qualitatively the nature of the turbulence controlling transport. Plugging this gap will require dedicated experiments, particularly on high-performance STs, and the development of reduced models that faithfully represent turbulent transport at high normalized pressure. Plasma scenarios in STEP will also need to be such that edge localized modes (ELMs) either do not occur or are small enough to be compatible with material lifetime limits. The high current needed for a power plant-relevant plasma leads to the unavoidable generation of high runaway electron beam current during a disruption, where novel mitigation techniques may be needed. This article is part of the theme issue ‘Delivering Fusion Energy – The Spherical Tokamak for Energy Production (STEP)’.