PLC mechatronics technology in the field of intelligent control application analysis

Abstract

The traditional manual operation mode has problems such as high manpower cost, low efficiency, low safety, low operating precision, etc. Achieving unmanned intelligent systems in the field of mechanical and electrical engineering has become the key to transforming and upgrading relevant enterprises and improving their overall competitiveness. In this paper, an improved fuzzy PID control system is constructed based on a PLC control system combined with a fuzzy PID intelligence algorithm. It is applied to the pumping motor, coagulation dosing system, and other specific devices for simulation experiments, compared to the conventional PID algorithm, and evaluated the control system in this paper. The fuzzy PID control algorithm of this paper reduces the steady-state adjustment time of the response curve by 30% compared to the conventional PID algorithm, and the overshooting amount is reduced by 25%. With almost no overshoot, the pumping motor that was equipped with this paper’s PID algorithm reached its stable target speed in 0.3 seconds. In addition, this study found that in the coagulation dosing system model incorporating the fuzzy PID algorithm of this paper, when the model is accurate, only 20% of the overshooting amount occurs after the system has been running for some time. The conventional PID algorithm’s 50% overshoot is significantly less than this, and the time it takes to reach a steady state is also 50 minutes earlier than the conventional PID control. When the model is imprecise, fluctuations occur in both conventional PID control and fuzzy PID control, but the amplitude of the fluctuations in fuzzy PID control is relatively small. In conclusion, this paper shows that the fuzzy PID control algorithm in this paper has higher control accuracy, response speed, and stability than the conventional PID control algorithm.