Polyethersulfone (PES) and Its Processing

Qi, Kun; Huang, Rui

doi:10.1016/b978-081551426-8.50006-4

Cited by 1 publication

(1 citation statement)

References 25 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…PESU has thermal, structural and chemical stability due to the combination of sulfonyl groups and aromatic rings in its molecular structure [ 5 ]. The high-thermal stability of PESU, a desirable property, enables the use of processing temperatures between 320 °C and 400 °C for extrusion and injection molding [ 4 , 6 ]. This high-temperature processing partially accounts for the high material and production costs.…”

Section: Introductionmentioning

confidence: 99%

Open-Celled Foams from Polyethersulfone/Poly(Ethylene Glycol) Blends Using Foam Extrusion

et al. 2022

View full text Add to dashboard Cite

Polyethersulfone (PESU), as both a pristine polymer and a component of a blend, can be used to obtain highly porous foams through batch foaming. However, batch foaming is limited to a small scale and is a slow process. In our study, we used foam extrusion due to its capacity for large-scale continuous production and deployed carbon dioxide (CO2) and water as physical foaming agents. PESU is a high-temperature thermoplastic polymer that requires processing temperatures of at least 320 °C. To lower the processing temperature and obtain foams with higher porosity, we produced PESU/poly(ethylene glycol) (PEG) blends using material penetration. In this way, without the use of organic solvents or a compounding extruder, a partially miscible PESU/PEG blend was prepared. The thermal and rheological properties of homopolymers and blends were characterized and the CO2 sorption performance of selected blends was evaluated. By using these blends, we were able to significantly reduce the processing temperature required for the extrusion foaming process by approximately 100 °C without changing the duration of processing. This is a significant advancement that makes this process more energy-efficient and sustainable. Additionally, the effects of blend composition, nozzle temperature and foaming agent type were investigated, and we found that higher concentrations of PEG, lower nozzle temperatures, and a combination of CO2 and water as the foaming agent delivered high porosity. The optimum blend process settings provided foams with a porosity of approximately 51% and an average foam cell diameter of 5 µm, which is the lowest yet reported for extruded polymer foams according to the literature.

show abstract

Section: Introductionmentioning

confidence: 99%