Preparation and optimization of multifunctional electrospun polyurethane/chitosan nanofibers for air pollution control applications

Abstract

Urban air pollution caused by fine particles, the increasing development of nanotechnology and the spread of contagious diseases, as well as bioterrorism, has raised concerns about aerosols and bioaerosols. This research aims to study the effect of various parameters on the diameter and uniformity of electrospun polyurethane/chitosan nanofibers and to evaluate their filtration performance and antimicrobial activity against nanoaerosols and Escherichia coli (E. coli) bacteria as a model bioorganism, respectively. Using response surface methodology, the main and interactive effects of four parameters including polyurethane/chitosan weight ratio, applied voltage, needle tip-to-collector distance and polymer flow rate were investigated on the mean diameter and uniformity of electrospun nanofibers. The nanoparticle filtration efficiency of the polyurethane/ chitosan electrospun nanofiber filter was determined after preparation under recommended optimum conditions using a standard filtration test rig. There was an increase in the mean diameter of nanofibers and decrease in the uniformity of them with increase in polyurethane polymer solution concentration. The mean diameter of nanofibers decreased significantly with increasing applied voltage and chitosan content in polyurethane/chitosan blended polymer solution. A significant, positive correlation was seen between needle tip-to-collector distance, polymer flow rate and the mean diameter of nanofibers. The prepared nanofiber filters showed an acceptable range of quality factor and pressure drop for using in filtration applications such as industrial filtration processes and personal respiratory protection equipment. The results of the performing bacterial disk diffusion method indicated that electrospun polyurethane/chitosan nanofibers have good antibacterial activity against E. coli bacteria as a model microorganism.

Electrospun ultrafine fibers for advanced face masks

“…Electrospun ultrafine fibers also have wide applications in protecting against bioaerosols like bacteria [ 129 ]. Dhineshbabu et al made a MgO/nylon 6 hybrid nanofiber mat for protective clothing with better fire retardancy and antibacterial activity than those of nylon 6 nanofiber [ 128 ] ( Fig.…”

Electrospun nanofibers of polyvinylidene fluoride incorporated with titanium nanotubes for purifying air with bacterial contamination

“…In general, aerosols can be transmitted through smoke, volatile and organic particles, pollens, dust, etc. (Dhital and Rupakheti 2019 ; Felix Swamidoss et al 2019 ; Mohraz et al 2019 ).…”

“…Fibrous aerosol filters have been extensively studied due to their high filtration efficiency, uniformity, high surface area, etc. However, the crisis of high energy consumption is of prime concern as far as fibrous filters are considered, as the major requirement in any air filter includes high filtration efficiency and low-pressure drop (Mohraz et al 2019 ; Wang et al 2012 ). Filtration efficiency increases as the fiber size decreases with respect to the number of fibers present per unit area.…”

Silver-incorporated poly vinylidene fluoride nanofibers for bacterial filtration

“…In addition, it comes under the category of high value low input class due to its minute size and efficiency. Among various technologies available including cyclotrons, wet scrubbers, electrostatic precipitators, gravimetric precipitators, etc., fibrous filters own their peak application due to their higher efficiency collection particles up to less than one micrometer (Tabe 2014;Mohraz et al 2018).…”