PV inverter performance and reliability: What is the role of the IGBT?

Abstract

The inverter is still considered the weakest link in modern photovoltaic systems. Inverter failure can be classified into three major categories: manufacturing and quality control problems, inadequate design, and electrical component failure. It is often difficult to deconvolve the latter two of these, as electrical components can fail due to inadequate design or as a result of intrinsic defects. The aim of the current work is to utilize the extensive background in both inverter performance testing and component reliability found at Sandia National Laboratories to assess the role of component failures in PV performance and reliability. Although there is no consensus on the least reliable component in a modern inverter system, the IGBT is often blamed for failures and hence this was the first component we studied. A commercially available 600V, 60A, silicon IGBT found in common residential inverters was evaluated under normal and extreme operating conditions with DC and pulsed biasing schemes. Although most of the sample devices were robust even under extreme conditions, a few of the samples failed during operation well within the manufacturer-specified limits. Additionally, we have begun in situ monitoring of IGBTs as well as other components within an operating 700 W, single-phase inverter. The in situ testing will guide future device-level work since it allows us to understand the conditions that are experienced by inverter components in a realistic operating environment.

Insulated gate bipolar transistor reliability testing protocol for PV inverter applications

“…Similar electrical degradation characteristics were found by Kaplar et al . . In addition to the changes in V CE(on) , they also noted a significant leakage current in the gate voltage of stressed modules.…”

Circulating Current Produced in a System of two Inverters Connected in Parallel Due to a Difference Between the Zero-Vector Parameters

“…In our study, both inverters have the same power performance, and the output voltage of the system is regulated to a constant value. (Kaplar et al, 2011) and the corresponding anti-parallel diodes for the phase "a" of the two inverters shown in Fig. 1.…”

Identification of technical risks in the photovoltaic value chain and quantification of the economic impact

“…The failure modes that mostly affect PV inverters are related to units exposed to high thermal and electrical stress as well as the thermal management system itself . Electronic components such as bus capacitors, electronic switches (e.g.…”