Research on Abrasive Pool Machining Method Based on Gas-solid Two-phase Flow

Abstract

For complex curved difficult to machine parts, a new method based on pneumatic suspension abrasive pool bright finishing processing is proposed, using the mixing of pneumatic suspension abrasive, the workpiece surface and fluidized abrasive to produce relative motion velocity, so that the solid particles and workpiece surface microscopic two-body abrasive wear to achieve the effect of precision machining. The experimental test material is the widely used Q235 steel plate. The experimental parameters include workpiece shape (round tube, square tube, cylindrical), abrasive particle size (24, 80, 120 mesh count), gas-solid two-phase flow pattern (dispersion fluidization state, turbulent fluidization state, spurting fluidization state), abrasive particle shape (sphere, irregularity) and spindle speed (600, 900, 1200 rpm). An orthogonal test was designed according to the experimental parameters, and the degree of influence of each parameter on the processing of the abrasive cell was evaluated by the roughness of the workpiece surface together with the scanning electron microscope (SEM) micrograph of the workpiece surface, and the optimal combination of parameters was judged using the extreme difference method as well as the factor trend diagram. The results show that under the present experimental conditions, the workpiece surface roughness (Ra) can reach a minimum value of 0.4 µm. The feasibility of gas-solid two-phase flow processing is demonstrated from an experimental point of view, and the advantages of abrasive cell processing are explored.