Research on the Formation Characteristics of the Shaped Charge Jet from the Shaped Charge with a Trapezoid Cross-Section

Abstract

The formation characteristics of the shaped charge jet (SCJ) from the shaped charge with a trapezoid cross-section is analyzed in this work. A theoretical model was developed to analyze the collapsing mechanism of the liner driven by the charge with a trapezoid cross-section. Based on the theoretical model, the axial and radial velocities of the SCJ from different trapezoid cross-section charges. The pressure model was employed to calculate the velocity for the subcaliber shaped charge, which was verified through numerical simulation. The results show that the influence of the angle of the trapezoidal charge (acute angle) on the axial velocity of the SCJ is not distinct, whereas the variation of the radial velocity of the shaped charge jet is obvious as the change in the angle of the trapezoidal charge. In addition, the related X-ray experiments were conducted to verify the theory. The theoretical results correlate with the experimental results reasonably well.

Editorial for the Special Issue “Materials under High Pressure”

“…In addition to deformation and fracture, materials under extreme high pressure also undergo flow and phase changes. Ma et al [ 6 ] analyzed the formation characteristics of the shaped charge jet (SCJ) from the shaped charge with a trapezoid cross-section. A theoretical model was developed to analyze the collapsing mechanism of the liner driven by the charge with a trapezoid cross-section.…”