Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Edalati, Kaveh; Ahmed, Anwar Q.; Akrami, Saeid; Ameyama, Kei; Aptukov, Valery; Asfandiyarov, Rashid N.; Ashida, Maki; Astanin, Vasily; Bachmaier, Andrea; Beloshenko, Victor; Bobruk, Elena V.; Bryła, Krzysztof; Cabrera, José María; Carvalho, Amanda P.; Chinh, Nguyen Q.; Choi, In-Chul; Chulist, Robert; Cubero-Sesin, Jorge M.; Davdian, Gregory; Demirtas, Muhammet; Divinski, Sergiy; Durst, Karsten; Dvorak, Jiri; Edalati, Parisa; Emura, Satoshi; Enikeev, Nariman A.; Faraji, Ghader; Figueiredo, Roberto B.; Floriano, Ricardo; Fouladvind, Marjan; Fruchart, Daniel; Fuji, Masayoshi; Fujiwara, Hiroshi; Gajdics, Marcell; Gheorghe, Diana; Gondek, Łukasz; González-Hernández, Joaquín E.; Gornakova, Alena; Grosdidier, Thierry; Gubicza, Jenő; Gunderov, Dmitry; He, Liqing; Higuera, Oscar Fabian; Hirosawa, Shoichi; Hohenwarter, Anton; Horita, Zenji; Horky, Jelena; Huang, Yi; Huot, Jacques; Ikoma, Yoshifumi; Ishihara, Tatsumi; Ivanisenko, Yulia; Jang, Jae-il; Jorge, Alberto M.; Kawabata-Ota, Mie; Kawasaki, Megumi; Khelfa, Tarek; Kobayashi, Junya; Kommel, Lembit; Korneva, Anna; Kral, Petr; Kudriashova, Natalia; Kuramoto, Shigeru; Langdon, Terence G.; Lee, Dong-Hyun; Levitas, Valery I.; Li, Cong; Li, Hai-Wen; Li, Yongtao; Li, Zheng; Lin, Huai-Jun; Liss, Klaus-Dieter; Liu, Ying; Cardona, Diana Maritza Marulanda; Matsuda, Kenji; Mazilkin, Andrey; Mine, Yoji; Miyamoto, Hiroyuki; Moon, Suk-Chun; Müller, Timo; Muñoz, Jairo Alberto; Murashkin, Maxim Yu.; Naeem, Muhammad; Novelli, Marc; Olasz, Dániel; Pippan, Reinhard; Popov, Vladimir V.; Popova, Elena N.; Purcek, Gencaga; de Rango, Patricia; Renk, Oliver; Retraint, Delphine; Révész, Ádám; Roche, Virginie; Rodriguez-Calvillo, Pablo; Romero-Resendiz, Liliana; Sauvage, Xavier; Sawaguchi, Takahiro; Sena, Hadi; Shahmir, Hamed; Shi, Xiaobin; Sklenicka, Vaclav; Skrotzki, Werner; Skryabina, Nataliya; Staab, Franziska; Straumal, Boris; Sun, Zhidan; Szczerba, Maciej; Takizawa, Yoichi; Tang, Yongpeng; Valiev, Ruslan Z.; Vozniak, Alina; Voznyak, Andrei; Wang, Bo; Wang, Jing Tao; Wilde, Gerhard; Zhang, Fan; Zhang, Meng; Zhang, Peng; Zhou, Jianqiang; Zhu, Xinkun; Zhu, Yuntian T.

doi:10.1016/j.jallcom.2024.174667

Cited by 38 publications

(1 citation statement)

References 1,930 publications

Supporting

Mentioning

Contrasting

Order By: Relevance

“…The formation of a heterogeneous microstructure across the sample thickness is supported by these observations. According to recent studies, heterostructured metallic materials are a novel category of materials that have the potential to disrupt established paradigms, including the incompatibility between strength and ductility [ 27 , 28 ].…”

Section: Resultsmentioning

confidence: 99%

Effect of Heat Treatment on the Microstructural Heterogeneity and Abrasive Wear Behavior of ASTM A128 Grade C Steel

Higuera-Cobos,

Cely-Bautista,

Muñoz-Bolaños

2024

Materials

View full text Add to dashboard Cite

Microstructural heterogeneities of an ASTM A128 grade C steel subjected to heat treatments and their effect on abrasive wear behavior were investigated. The heat-treatment process involved different austenization times at 1050 °C and quenching media. To characterize the effects of heat treatment on the material’s microstructure and mechanical behavior, two microscopy techniques were used: optical microscopy (OM), and scanning electron microscopy (SEM). The chemical composition of the material was obtained using X-ray fluorescence (XRF) optical emission spectrometry. The variation in carbide composition was evaluated using X-ray Energy Dispersive Spectroscopy (EDS). To characterize the mechanical behavior of the steel, hardness measurements and abrasive wear tests were performed after homogenization annealing and quenching treatments. The results showed that the heat-treated samples developed a heterogeneous microstructure, with the presence of austenitic grains and Martensite around the surface of the samples induced by decarburization in both the protected and unprotected specimens. The specimens with lower decarburization presented less formation of Martensite and precipitated carbides, resulting in lower hardness values and higher abrasion resistance (solution treatment at 1080 °C for 1 h + sand protection + brine quenching).

show abstract

Section: Resultsmentioning

confidence: 99%

Effect of Heat Treatment on the Microstructural Heterogeneity and Abrasive Wear Behavior of ASTM A128 Grade C Steel

Higuera-Cobos,

Cely-Bautista,

Muñoz-Bolaños

2024

Materials

View full text Add to dashboard Cite

show abstract

Co‐Deformation in Severely Deformed Multiphase Crystalline Metallic Systems: Physical Mechanisms, Intrinsic Limitations, and Perspectives

Sauvage

2024

Adv Eng Mater

View full text Add to dashboard Cite

The deformation of multiphase metallic alloys or metal matrix composites by forming processes such as rolling or drawing requires the co‐deformation of phases. Severe plastic deformation processes have extended possibilities with the ability to produce unique nanoscaled structures through the formation of strain‐induced super‐saturated solid solutions, the fragmentation of second‐phase particles, or ultimate co‐deformation down to the nanoscale. Based on various examples, the fundamental mechanisms of co‐deformation are addressed. Parameters that promote the extension of existing heterophase boundaries are discussed, and some possible atomic‐scale mechanisms involving dislocation activities based on geometrical and energetic considerations are proposed. Finally, the physical limits of co‐deformation are considered before suggesting research directions that might be followed to develop fundamental knowledge and applications in the field.

show abstract

Optimization of friction stir processing to improve the mechanical properties of bone fixation plate inputs made of ZK60 magnesium alloy

Thanikodi,

Giri,

Ramesh

et al. 2024

Int J Adv Manuf Technol

View full text Add to dashboard Cite

Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Cited by 38 publications

References 1,930 publications

Effect of Heat Treatment on the Microstructural Heterogeneity and Abrasive Wear Behavior of ASTM A128 Grade C Steel

Effect of Heat Treatment on the Microstructural Heterogeneity and Abrasive Wear Behavior of ASTM A128 Grade C Steel

Co‐Deformation in Severely Deformed Multiphase Crystalline Metallic Systems: Physical Mechanisms, Intrinsic Limitations, and Perspectives

Optimization of friction stir processing to improve the mechanical properties of bone fixation plate inputs made of ZK60 magnesium alloy

Contact Info

Product

Resources

About