Shape Optimization of A 3D Slider with Dimples

Abstract

Sliding contacts in laminar flow regimes have been investigated extensively in recent years. The results indicate the possibility to increase load carrying capacity in a slider bearing for more than 10% with the addition of dimples. Parametric studies have been performed to determine optimal size and position, with emphasis in the optimal shape and position of the dimple for an operating condition. In this article, the numerical analysis of a 2D textured slider bearing with a dimple is initially considered with an isothermal laminar fluid. Position, depth, width and convergence ratio are optimized, the results demonstrate the importance of the width and convergence ratio to increase load. Then, the numerical analysis of a 3D textured slider bearing with fore-region and extended channels at the outlet and on the sides of a pad is considered. The simulations are also carried out for a laminar isothermal flow. Three dimples are considered and their depth is optimized.