Shear rate effect on the residual strength characteristics of saturated loess

Abstract

Abstract. Residual shear strength of soils is an important soil parameter for assessing the stability of landslides. To investigate the effect of the shear rate on the residual shear strength of loessic soils, a series of ring shear tests were carried out on loess from three landslides at two shear rates (0.1 mm/min and 1 mm/min). Naturally drained ring shear tests results showed that the shear displacement to achieve the residual stage for specimens with higher shear rate was greater than that of the lower rate; both the peak and residual friction coefficient became smaller with increase of shear rate for each sample; at two shear rates, the residual friction coefficients for all specimens under the lower normal stress were greater than that under the higher normal stress. The tests results revealed that the difference in the residual friction angle фr at the two shear rates, фr (1)–фr (0.1), under each normal stress level were either positive or negative values. However, the difference фr(1)–фr (0.1) under all normal stresses was negative, which indicates that the residual shear parameters reduced with the increasing of the shear rate in loess area. Such negative shear rate effect on loess could be attributed to a greater ability of clay particles in specimen to restore broken bonds at low shear rates.