Simulation modelling of cold rolled metal strip by asymmetric technology

Abstract

In the article provided the results of studies the optimization of energy-saving technologies in mechanical engineering using modern methods of simulation modeling is becoming an urgent area for the informatization of engineering production on the process of cold asymmetric rolling of metal sheets is accompanied by an inhomogeneous stress-strain state. The research considers the noncanonical areas of strain, an approach is proposed for determining the optimal technological parameters and studying the stress state of the cold rolling process using asymmetric rolling technology in the active zone of elastoplastic strains based on simulation using the application software LS-DYNA by LS-PrePost (R) version V4.6.1. To optimize energy-saving for rolling technologies, considered a stationary regime of symmetrical rolling, the kinetic energy does not change over time, and the potential energy in the active zone of elastic-plastic strains tends to increase. For the case of asymmetric rolling, a high level of kinetic energy is observed, and there is a fluctuation over time, explained by different coverage of asymmetric rollers in the zone of active elastic-plastic strains, as a result of which the stationary nature of the metal sheet rolling mode is violated.

Crystallographic structural changes of Al1050 under different types of sheet metal rolling

“…The projected contact arc length between rolls and the processed material (Lp) can be determined as [3]:…”

“…In recent years, mathematical models have received significant development, adequately describing the stress-strain state of coils of hot-rolled and cold-rolled sheet steel and nonferrous metals [2][3][4]. This problem can be solved both experimentally and theoretically.…”

Conditions for vertical pulling of semi-finished leather products under driving rollers

“…Publications of foreign scientists are devoted to modern methods of research and analysis of the properties of leathers and hides [16][17][18]. The issues of improving the design of roller equipment, including the study of the interaction of the roll module with the processed material, are described in [19][20][21][22].…”

Experimental dehydration of wet fibrous materials

“…These publications are devoted to the following areas: research of the general cycle of leather production, individual process research, waste treatment, and recycling technologies, and long-term strategy ideas for the leather industry. Research in [13][14][15][16][17][18][19][20][21] is devoted to improving and analyzing the designs of roller squeezing machines that contribute to increasing labor productivity and efficiency of technological processes for processing sheet and fibrous materials.…”