Simultaneous electromagnetic field probing system with Y‐shaped separation detection structure

Abstract

Simultaneous electromagnetic field probing system (SEMPS) has been popular in recent years. Herein, a simultaneous electromagnetic field probing system with Y‐shaped separation detection structure (SEMPS Y) is first proposed, in which the electric field probing region and the magnetic field probing region of the probe are separated by completely covering the shield along the loop and adding a pin‐shaped metal wire to capture the electric field, which are not the same as the classical dual probe structure. Combined with the non‐rotating asymmetric calibration method (NRACM), a 4‐port vector network analyser (VNA) and a highly symmetric grounded coplanar waveguide (GCPW) calibrator are used to solve the calibration matrix of the asymmetric SEMPS Y. The high symmetry GCPW calibrator is used to generate the standard electromagnetic field for calibration. The results of standing wave measurements show that the SEMPS Y can achieve ultrawideband electromagnetic field measurement of up to 20 GHz. Based on near‐field scanning measurements, SEMP Y can obtain results consistent with the calculation. In addition, when the probe is rotated 90° to invalidate the H‐field input, the decoupling curves of E‐field and H‐field are measured. Results show that the separation detection structure can effectively solve the cross‐coupling problem.