Status and prospects for production of carbon fibres based on polyacrylonitrile

Abstract

Production of PAN-based carbon fibres (CF) is a rapidly developing sector. Production in 2006 was 28,000 tons. The production capacities in 2007 increased to 55,500 tons and will attain 66,000 tons in 2008. The Japanese companies Toray, Toho, and Mitsubishi are the leaders and are responsible for 77% of total production. Toray is the leader with respect to fibre quality. The CF manufactured by the company basically have a strength of 500-560 kgf/mm 2 . The properties of the PAN precursor are of decisive importance for the quality of the CF. Each company has its own PAN precursor plant for successfully competing. The fibre manufactured in the RF has a strength of 300-350 kgf/mm 2 . Uglekhimvolokno NITs has developed technology for production of CF with a strength of 450 kgf/mm 2 . Economy in production of CF is attained by creating units (flow production lines) with individual capacity of 150-200 and even 400 tons/year (the capacity of existing domestic units is 10-20 tons/year). This increase in capacity is attained by using primarily new technical solutions, including conductive tempering of oxidized tows, separate air-oxidant and air-heat carrier circulation, making the PAN tow compact by selecting an appropriate oiling agent, and vertically positioning the carbonization furnace stack. The maximum modulus of elasticity of PAN CF is 60,000 kgf/mm 2 . To attain high orientation and a high degree of crystallinity, boron, which decreases the temperature of transition of the fibre into the highly elastic state and thus facilitates the occurrence of orientation drawing and crystallite growth, should be used as a plasticizer. In semi-industrial conditions, when boron is added in the stage of oxidation in the form of boric acid, CF with a modulus of elasticity of 47,700 kgf/mm 2 are obtained. To prolong the lifetime of the graphite heaters, it is recommended that they be given a shape that allows focusing radiation on the processed fibre. Thin carbon fillers in the form of prepregs 0.04-0.17 mm thick and fabrics 0.11-0.15 mm thick are manufactured to increase the uniformity of the properties of multilayer composites. Prepregs made of thick PAN tow with a linear density of 3.2 ktex which are processed into CF with a strength of 500 kgf/mm 2 , elongation of 2%, and modulus of elasticity of 23,000 kgf/mm 2 , are the most economical. In the RF, unidirectional slivers of the Elur type 0.08 mm thick are manufactured for these purposes, but they have lower strength and due to the low processing speeds, high cost. These drawbacks have been eliminated in the semicontinuous method for manufacturing thin PAN fibres.Carbon fibres manufactured from a polyacrylonitrile (PAN) precursor have a set of properties (high strength and modulus of elasticity, thermal stability, low density) which has made them irreplaceable in high-tech sectors of technology. Modern wide-body airplanes from Boeing and Airbus consist of 20-25% carbon fibres. The nuclear industry is converting to a progressive centrifugal method of uranium enrichment which wou...

Impact of the Hydration States of Polymers on Their Hemocompatibility for Medical Applications: A Review

“…Polyacrylonitrile (PAN) is obtained from the polymerization of a vinyl group linked to a nitrile (acrylonitrile), and is mostly used as a copolymer in the production of plastics, as a precursor of carbon fiber and as separation membrane material in hemodialysis [ 78 , 79 ]. Some studies show the improvement of the biocompatibility of PAN by immobilizing other polymers such as PEG and N -vinyl-2-pyrrolidone (NVP) [ 80 ].…”

Synthesis and Solution Processing of a Hydrogen-Bonded Ladder Polymer

“…[6][7][8][9][10][11][12][13][14][15][16][17] Moreover, because conjugated ladder polymers possess the pre-assembled structural feature similar to graphene nanoribbons, [18][19][20] it is anticipated that they could be transformed into graphitic carbon materials in a different manner than the prevailing carbon fiber precursors, such as polyacrylonitrile. [21][22][23] In this context, novel ladder polymers with synthetic and processing feasibility, structural versatility, and controlled functionality are expected to deliver breakthrough chemical, electronic, and mechanical functions for various applications.…”

Stealth technology: Methods and composite materials—A review

“…Carbon fiber reinforced polymer composites (CFRPCs) have been focused for many engineering and fundamental studies on the basis of their exceptional mechanical properties as compare to the other low density materials . It is also important to note that CFRPCs are quasi‐reflective at a high concentration (60%‐70% vol.)…”