Structural, FTIR and photoluminescence studies of Fe doped ZnO nanopowder by co-precipitation method

Role of the FeOxsupport in constructing high-performance Pt/FeOxcatalysts for low-temperature CO oxidation

“…8% occurs in the range of 100 to 220 °C. 29 The broad absorption bands at 3400 and 1620 cm -1 could be attributed to normal polymeric O-H stretching vibration of H 2 O present in these samples. 26 The obvious phase transformation should occur between 250 and 430 °C.…”

“…The latter stage accompanies with a strong endothermic peak, corresponding to the expulsion of water in the thermal-treated process. 26,29,30 The absorption band at 3695 cm -1 is assigned to the stretching vibration of surface OH. A strong exothermic peak (centre at 366 °C) with a small shoulder (at 290 °C) can be observed in this range.…”

High-performance self-powered/active humidity sensing of Fe-doped ZnO nanoarray nanogenerator

“…4. The spectra of both the NWs have a very strong visible emission locating around ∼520 nm, usually resulting from the radiative recombination of a photo-generated hole with an electron occupying the oxygen vacancy on the surface of the NWs [20][21][22]. The absorption-excitation intensity of ZnO NW arrays obviously increase after doping Fe.…”

“…5b-j. At the absorption process, as the relative humidity is5,15,20,25,30, 35, 40, 45, 50 and 60% RH, the piezoelectric output voltage of the device is 0.85, 0.815, 0.806, 0.786, 0.752, 0.698, 0.63, 0.576, 0.464 and 0.21 V, respectively. The piezoelectric output voltage decreased with the increasing relative humidity.…”

Structural, Optical and Antibacterial Activity of Pure and Cadmium Doped Zinc Oxide Nano Particles

“…Nanoparticles are of great interest for many technical applications and fundamental research due to the dependent physical properties [1][2][3][4]. Nanostructure materials have received broad attention due to their distinguished performance in electronics, optics and photonics.…”