Structure and Strength Optimization of the Bogdan ERCV27 Electric Garbage Truck Spatial Frame Under Static Loading

Abstract

Taking into account the requirements to reduce the release of harmful emissions into the environment, the EU’s environmental standards when transitioning to the Euro 7 standard in 2025 will actually lead vehicles having to operate without producing emissions in all driving situations. Carmakers believe that the new, much stricter regulations will mark the end of the internal combustion engine era. For example, in 2030, the manufacturer SEAT will cease its activities, leaving behind the Cupra brand, which will be exclusively electric in the future. This trend will apply not only to private vehicles (passenger cars), but also to utility vehicles, which is the subject of our research, namely the spatial tubular frame in the Bogdan ERCV27 garbage truck, presented in the form of a solid model. The peculiarity of the studied model is the installation of a battery block behind the driver’s cabin, causing an additional load to be placed on the spatial frame of the garbage truck, which in terms of its architecture is more like the body of a bus. During the conditions involving various modes of operation of a full-scale Bogdan ERCV27 garbage truck sample, questions about the strength and uniformity of its load-bearing spatial frame inevitably arise, which are decisive, even at the stage of designing and preparing the technical documentation. The main static load mode, which, despite its name, also covers dynamic conditions, was modeled using the appropriate coefficient kd = 2.0. The maximum stresses on the model during the “bending” mode were 381.13 MPa before structure optimization and 270.5 MPa as a result of the improvement measures. The spatial frame mass was reduced by 4.13%. During the “torsion” mode, the maximum deformation values were 12.1–14.5 mm, which guarantees the normal operation of the aggregates and units of the truck.