Study on the Changing Law of Cutting and Ultrasonic Strengthening Surface Integrity during Fatigue of Ti-17 Alloy

Abstract

The distribution of surface integrity features directly affects the initiation and propagation of fatigue cracks. In this paper, the surface integrity characteristics changing law of turning and ultrasonic impacting specimens during high cycle fatigue loading has been studied, and the effect of surface modified layer on the fatigue properties of titanium alloy has been revealed. The results showed that the surface roughness increased with the increase of fatigue cycles. The compressive residual stress and its gradient distribution depth decreased continuously. The gradient distribution depth of residual stress in the ultrasonic-impacted surface rapidly decreased by about 50% near the fracture stage. Local cyclic hardening occurred at 20–50 μm from the surface of the specimen in the early stage of fatigue evolution, and then the microhardness continued to decrease. During this process, there were no significant changes in hardened layer depth. The fibrous microstructure of the ultrasonic-impacted surface undergoes a process from coarsening to gradual disintegration during the fatigue process. Its attenuation process needs a longer period of time. The fatigue source of the turned specimen was located at about 320 μm from the surface, and the fatigue source of ultrasonic impact was about 610 μm from the surface. The fatigue striation width of the ultrasonic impact specimen was about 20% narrower than that of the turned specimen. The fatigue life of the ultrasonic impact specimen was increased by 73.9% compared with the turned specimen. The research in this paper is of great significance for exploring the anti-fatigue mechanism and the ability of various surface integrity features.