Surface Characteristic of Chemically Converted Graphene Coated Low Carbon Steel by Electro Spray Coating Method for Polymer Electrolyte Membrane Fuel Cell Bipolar Plate

Abstract

Graphene was coated on low carbon steel (SS400) by electro spray coating method to improve its properties of corrosion resistance and contact resistance. Exfoliated graphite was made of the graphite by chemical treatment (Chemically Converted Graphene, CCG). CCG is distributed using dispersing agent, and low carbon steel was coated with diffuse graphene solution by electro spray coating method. The structure of the CCG was analyzed using XRD and the coating layer of surface was analyzed using SEM. Analysis showed that multi-layered graphite structure was destroyed and it was transformed in to fine layers graphene structure. And the result of SEM analysis on the surface and the cross section, graphene layer was uniformly formed with 3-5 microm thickness on the surface of substrate. Corrosion resistance test was applied in the corrosive solution which is similar to the polymer electrolyte membrane fuel cell (PEMFC) stack inside. And interfacial contact resistance (ICR) test was measured to simulate the internal operating conditions of PEMFC stack. As a result of measuring corrosion resistance and contact resistance, it could be confirmed that low carbon steel coated with CCG was revealed to be more effective in terms of its applicability as PEMFC bipolar plate.

Liquid‐Exfoliated 2D Materials for Optoelectronic Applications

“…However, large amount of waste can be generated during the spray-coating process, making it unsuitable for rare or expensive nanomaterials. 2D materials that have been used for spray-coating deposition include graphene [267] and TMDs. [250,268] One form of spray-coating method, the dynamic spray-gun method, has been used to deposit graphene and its composites with other nanomaterials for various electronic and energy devices, including supercapacitors and random access memories.…”