Teaching sine wave concept through simulation for elementary school students

Nugroho, Pambudi; Dewi, Destia; Putri, Hafiziani Eka; Jannah, Fathul; Zanah, F. W.

doi:10.1088/1742-6596/1987/1/012044

Cited by 3 publications

(4 citation statements)

References 3 publications

Supporting

Mentioning

Contrasting

Unclassified

Order By: Relevance

“…Penelitian tersebut tidak melibatkan eksperimen langsung. Berbeda dengan penelitian Dewi et al, 2021;Fuada & Dewi, 2023) yang menganalisis sinyal kotak, studi oleh (Nugroho et al, 2021) mensimulasikan sinyal sinusoida dalam pengukuran frekuensi melalui Oscilloscope virtual yang mana sinyal input dibangkitkan oleh Frequency Generator virtual.…”

Section: Pendahuluanunclassified

“…Setelah berhasil dirangkai, selanjutnya rangkaian filter diuji dengan cara membangkitkan gelombang sinus dengan frekuensi tertentu oleh Frequency Generator, kemudian sinyal output rangkaian filter diukur pada Virtual Oscilloscope dengan pembacaan manual, yaitu menggunakan aturan pembacaan Oscilloscope jenis analog seperti yang ditampilkan pada Persamaan (9) (Nugroho et al, 2021). Hal ini karena versi Circuit Wizard yang digunakan dalam penelitian ini hanya menyediakan virtual Oscilloscope jenis analog.…”

Section: Untuk Menyederhanakan Perhitungan Dipilih Nilaiunclassified

See 1 more Smart Citation

Simulation of Active Sallen Key Notch Filter Circuit Using Circuit Wizard and Its Real Testing

Fuada,

Liu,

Anggraeni

et al. 2023

JITE

View full text Add to dashboard Cite

An electronic circuit that functions to block or hold signals with intermediate frequencies (median) and will forward signals between low frequencies and high frequencies is the definition of a Notch Filter. The Band Stop Filter, also often referred to as the Notch Filter, is a combination of a Low Pass Filter and a High Pass Filter connected in parallel. This connection differs from the Band Pass Filter, which connects the Low Pass Filter and High Pass Filter in series. This study aims to discuss the simulation of the Sallen-key notch filter Circuit. The author also conducts real simulations to prove the Circuit by changing or adjusting the value of the components installed in the Circuit so that the frequency response is according to the target. The purpose and role of the Sallen-key notch filter and the working principle of the theory of each filter used. The research method used in the research work is to carry out virtual simulations using virtual simulators and live simulations

show abstract

Section: Pendahuluanunclassified

Section: Untuk Menyederhanakan Perhitungan Dipilih Nilaiunclassified

Simulation of Active Sallen Key Notch Filter Circuit Using Circuit Wizard and Its Real Testing

Fuada,

Liu,

Anggraeni

et al. 2023

JITE

View full text Add to dashboard Cite

show abstract

“…Selain itu, setiap komponen mudah ditemukan pada setiap library yang ada. Aplikasi ini hanya dapat dilakukan secara offline sehingga tidak membutuhkan akses internet (Darmawan & Rijanto, 2019;Dewi et al, 2021;Nugroho et al, 2021). Simulator ini memuat dua mode yang berbeda, yaitu circuit dan virtual.…”

Section: Metodologiunclassified

Analisis Rangkaian Pembagi Tegangan dan Perbandingan Hasil Simulasinya Menggunakan Simulator Offline

Fuada,

Yasmin,

Yustina

et al. 2022

CRC

View full text Add to dashboard Cite

This paper reveals the voltage divider circuit to better understand the fundamental working principles in detail. The approach was simulated using popular offline simulators (i.e., Pr, CW circuit, and virtual mode, EWB, Mu, P, Ye, TS, QUCS, LTS, SI, and PhET). Two scenarios were carried out: measuring the output voltage (Vout) with known R1, R2, and DC source (Battery) as a voltage input (Vin), then looking for R1 and R2 using four different calculation methods to obtain Vout as expected. Afterward, the value of R1 and R2 were inserted into the simulation circuit to guarantee if the current Vout value matched the initial Vout. Finally, the simulation results were compared with the calculation results. All simulators provide an attractive GUI, capable of simulating voltage measurements with 100% accuracy in terms of DC analyses, which is DC voltage (except the CW software, which is only 98%), and can be entered in any resistor value (except Ye and PhET software). Surprisingly, the results of this study can provide insight for beginners to understand essential topics in electrical engineering studies, e.g., the circuit topology, fundamental theory, and working principle of a voltage divider circuit. Besides, the student will understand an offline electronic-based simulator suitable for measuring voltage parameters. Furthermore, they are expected to apply this circuit to various electronic circuit cases.

show abstract

“…Hz. The readings on the analog oscilloscope were carried out manually by looking at the T/DIV and DIV [27], [28]. Meanwhile, on the frequency counter, the output frequency and period values were directly displayed, namely, T = 1.54 ms and f = 649 Hz (Figure 7).…”

Section: Technical Testingmentioning

confidence: 99%

Development of Educational Kit for Practical Course in the Topic of Phase-Shift RC Oscillator

Fuada

2022

Int. J. Onl. Eng.

View full text Add to dashboard Cite

This research develops a phase-shift RC Oscillator trainer kit that can be used to give undergraduate students an understanding of one of the materials related to analog circuit practicum. The Oscillator is one of the essential subtopics to be examined thoroughly by electrical engineering students. Furthermore, the Resistor and Capacitor modules were provided separately to be connected to the trainer through jumper cables. The phase-shift RC circuit in the trainer kit used a single Op-Amp 741 while the Network model utilized an Inverting Amplifier to determine the gain which must be ≥ 29 times, therefore, Rfeedback ≥ 29 Rgain (Rfeedback = 30 kΩ and Rgain = 1 kΩ). Two tasks in this learning media were completed by students, namely measuring the output frequency and observing the phase shift. The output signal on this trainer kit was observed using only an Oscilloscope and a frequency counter. The phase inverter of the phase-shift RC Oscillator adjusts the output signal by 180o and sends feedback to the input, therefore, there is positive feedback. Meanwhile, the trainer kit had an output frequency specification of ~649 Hz (C = 100 nF, R = 1 kΩ) and it shifts the phase by 60o on each RC network. Using 2 and 3 R-C networks, the phase shifts were 120o and 180o, respectively. The trainer kit was packaged in a box made of acrylic with dimensions l x w x h = 20 cm x 28 cm x 5 mm. Through a questionnaire consisting of 13 criteria, this trainer kit was declared valid, namely r count > 0.2960 (5%) and reliable (Cronbach's alpha > 0.60, which was 0.732) to be used as a learning media based on user responses, namely students (N = 35). In the context of technical education, this trainer kit also supports the efficient implementation of practicum without compromising the learning objectives due to the ease of operation (plug & play through jumper cables) compared to fully assembling the circuit using a project board.

show abstract

Teaching sine wave concept through simulation for elementary school students

Cited by 3 publications

References 3 publications

Simulation of Active Sallen Key Notch Filter Circuit Using Circuit Wizard and Its Real Testing

Simulation of Active Sallen Key Notch Filter Circuit Using Circuit Wizard and Its Real Testing

Analisis Rangkaian Pembagi Tegangan dan Perbandingan Hasil Simulasinya Menggunakan Simulator Offline

Development of Educational Kit for Practical Course in the Topic of Phase-Shift RC Oscillator

Contact Info

Product

Resources

About