Through Process Modelling of Rolling and Controlled Cooling of TRIP Assisted Bainitic Steel Rods and Prediction of the Retained Austenite in Products

Abstract

Abstract. Simulation of the rolling and controlled cooling sequence for bainitic steel rods was the general objective of the paper. The main focus was put on exploring possibility of prediction of the retained austenite occurrence in TRIP assisted bainitic steels. Existing discrete phase transformation models require long computing times and their application to optimization of industrial processes is limited. Therefore, a model based on the modified JMAK equation was proposed. The occurrence of the retained austenite was predicted by carbon distribution calculations in the austenite during bainite transformation. This model was implemented into the FE software for simulation of cooling of rods. The model was verified by comparison of results with the physical simulations during rolling in the pilot mill and during cooling. The first part of the paper contains thermal-mechanicalmicrostructural simulations of rod hot rolling process. The objective of this part was to determine temperature and grain size distribution at the rod cross section at the beginning of phase transformations. FE simulations of the cooling were performed next. Correlation between cooling parameters and the volume fraction of the retained austenite in rod was determined.