Light detection and ranging (LiDAR) serves as one of the key components in the fields of autonomous driving, surveying mapping, and environment detection. Conventionally, dense points clouds are pursued by LiDAR systems to provide high-definition 3D images. However, the LiDAR is typically used to produce abundant yet redundant data for scanning the homogeneous background of scenes, resulting in power waste and excessive processing time. Hence, it is highly desirable for a LiDAR system to “gaze” at the target of interest by dense scanning and rough sparse scans on the uninteresting areas. Here, we propose a LiDAR structure based on an optical phased array (OPA) with reconfigurable apertures to achieve such a gaze scanning function. By virtue of the cascaded optical switch integrated on the OPA chip, a 64-, 128-, 192-, or 256-channel antenna can be selected discretionarily to construct an aperture with variable size. The corresponding divergence angles for the far-field beam are 0.32°, 0.15°, 0.10°, and 0.08°, respectively. The reconfigurable-aperture OPA enables the LiDAR system to perform rough scans via the large beam spots prior to fine scans of the target by using the tiny beam spots. In this way, the OPA-based LiDAR can perform the “gaze” function and achieve full-range scanning efficiently. The scanning time and power consumption can be reduced by 1/4 while precise details of the target are maintained. Finally, we embed the OPA into a frequency-modulated continuous-wave (FMCW) system to demonstrate the “gaze” function in beam scanning. Experiment results show that the number of precise scanning points can be reduced by 2/3 yet can obtain the reasonable outline of the target. The reconfigurable-aperture OPA (RA-OPA) can be a promising candidate for the applications of rapid recognition, like car navigation and robot vision.